Thanks: 0
Likes: 0
Dislikes: 0
I have a HP DesignJet T610, came in to the shop with a Bad Drive Belt. After a few hours to replace that belt, Powered it up and it showed one of the print heads were bad..(cyan/magenta) ok.... figured might as well replace them all. All OEM Brand New. Now it comes up with a message
" Printhead replacement not complete...press ok to start printhead replacement" No matter what I do it still produces this error...even tried putting in the old heads. PLEASE HELP..Thank You
Re: HP DesignJet T610 Printhead Issues
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
I do have the Manual, tried everything I could find...Originally Posted by JustManuals.com
Found the Problem to be Ink low...even though they felt and registered somewhat full
This is it! Ink cartridge low...
I have had the same phenomenon a month ago...
i spent my life disassembling again and again the printer to find what was wrong..
Hi,
I have exactly the same problem, so you have replaced all the low ink cartridge?
That is all?
Many thanks in advance,
Fabrizio
Yes , after replacing all the ink cartridges, it worked fine
even though they didn’t feel or appear empty
That's ok, I will try and hope is going to work again...
Many thanks again
Reply With Quote
Bookmarks