Boot screen C452

[aboutalebidps]

Hi.
Who can explain to me about change that.I mean change Konicaminolta logo.

[xerotec]

this is procedure for develop but is same for konica minolta

[copier tech]

Here ya go!

Very simple to use. Works on all KM's from C280 onwards, play around with the scale etc to make a perfect fit.

Save the file as "BootUpScreen" to a USB drive, then you can load it via SE mode use the USB port on the side (not the service/FW one)

https://mega.nz/#!dIVSgDLZ!rGCV9sdes...roJmhm4X1kRMMg

[aboutalebidps]

this is procedure for develop but is same for konica minolta

Thanks .I check now

[copier addict]

Thanks .I check now

copier tech's suggestion is wayyyyyy easier. All you have to do is open you image in paint and size it. Save image as a jpeg. Open Boot Screen Converter 3.1.1. Click the plus sign, select your saved image, click "save as" and call it "bootscreen.bin". Save this file to a thumb drive and install on machine. Easy

[kingm]

copier tech's suggestion is wayyyyyy easier. All you have to do is open you image in paint and size it. Save image as a jpeg. Open Boot Screen Converter 3.1.1. Click the plus sign, select your saved image, click "save as" and call it "bootscreen.bin". Save this file to a thumb drive and install on machine. Easy

hi guys i have a b363 that doesnt want to boot up it just hang on the one hour sand then stops like that.

[copier tech]

hi guys i have a b363 that doesnt want to boot up it just hang on the one hour sand then stops like that.

Start a new thred

however i’d start by flashing the firmware.

[rrrohan]

I dont even bother with boot screen on 8 series since it's only displayed for a second or so

Prob gonna start customizing the main menu instead