Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Junior Member
    Join Date
    Jun 2015
    Location
    Dallas, Texas
    Posts
    9
    Rep Power
    0

    Exclamation Bizhub c654e 4 fax setup

    My first post so apologize if this is not in the correct spot

    I am trying to set up 4 faxes on this c654e and the setup went just fine...now comes the testing of it. we only have one phone line in the shop here and I can only get line one to TX or receive a fax. Whenever I plug the line into port 2 I cannot fax and get the following error message,

    T81

    which is check the line connection. I cannot figure out if I can specify which fax line to use, and dont know why it doesnt go to the next line if the first one isnt working (or is busy as would be in the shop we are delivering this to). I can provide much more detailed information about these konica's but have no idea what of it is relevant so please ask if I left information out.

    Chris

  2. #2
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    97

    Re: Bizhub c654e 4 fax setup

    4 fax lines would require 4 separate phone lines. The user can choose which outgoing line to use during the fax process. I don't think the MFP rolls over anything on its own, but you can designate which lines are outgoing in the fax defaults. I've only seen dual fax, but I'm assuming the 3rd and 4th just gives you more selections. Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

  3. #3
    Junior Member
    Join Date
    Jun 2015
    Location
    Dallas, Texas
    Posts
    9
    Rep Power
    0

    Re: Bizhub c654e 4 fax setup

    when you used dual fax lines, how did u specify which fax line to use?

  4. #4
    Aging Tech 10,000+ Posts
    Bizhub c654e 4 fax setup

    copier addict's Avatar
    Join Date
    Jul 2013
    Location
    Diamond
    Posts
    11,981
    Rep Power
    324

    Re: Bizhub c654e 4 fax setup

    You need a dedicated line for each fax board. You need to flip the tiny switch on one of them to "line 2".

  5. #5
    Junior Member
    Join Date
    Jun 2015
    Location
    Dallas, Texas
    Posts
    9
    Rep Power
    0

    Re: Bizhub c654e 4 fax setup

    Fax boards 2 through 4 have had their toggle switched to 2 as instructed in the MK-728 Manual. I just dont understand how I am suppose to test the other 3 boards on the machine if I cannot choose which to use to send a fax from. Is it impossible to test it without 4 dedicated lines?

  6. #6
    Aging Tech 10,000+ Posts
    Bizhub c654e 4 fax setup

    copier addict's Avatar
    Join Date
    Jul 2013
    Location
    Diamond
    Posts
    11,981
    Rep Power
    324

    Re: Bizhub c654e 4 fax setup

    What is the point of having four fax boards if there isn't going to be four fax lines?

  7. #7
    Junior Member
    Join Date
    Jun 2015
    Location
    Dallas, Texas
    Posts
    9
    Rep Power
    0

    Re: Bizhub c654e 4 fax setup

    I am in the shop trying to test it before we deliver to the customer next week, and we only have one phone line up here.

  8. #8
    Aging Tech 10,000+ Posts
    Bizhub c654e 4 fax setup

    copier addict's Avatar
    Join Date
    Jul 2013
    Location
    Diamond
    Posts
    11,981
    Rep Power
    324

    Re: Bizhub c654e 4 fax setup

    I see.
    I don't think you can properly test a four line setup with only one line.
    Looks like it will be a "flying by the seat of your pants" install. I hate those ones. Lol

  9. #9
    Junior Member
    Join Date
    Jun 2015
    Location
    Dallas, Texas
    Posts
    9
    Rep Power
    0

    Re: Bizhub c654e 4 fax setup

    I do too! that's the reason I decided to make my account and finnally post on here instead of just searching for solutions. I already told my boss that and looks like I will be on the team that goes out to install it, do I need to close the thread or anything since I've got my unfortunate (yet inevitable) answer?

  10. #10
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    97

    Re: Bizhub c654e 4 fax setup

    Fax.pdf


    here you go...plug into line 2, select line 2...then line 3 and so on...Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here