Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 28
Disable doc feeder on bh363?
Is there an admin or service setting to disable the doc feeder whilst I wait on the latch? I can't find one in the manuals or at the control panel. Or just disconnect the cables (wish it were a quick disconnect, like the older models).
Thanks,
RB
-
Re: Disable doc feeder on bh363?
You should be able to go into the service mode, select System 1, and then select Trouble isolation and unset the document feeder.
-
Re: Disable doc feeder on bh363?
Just have the customer stick a ream of paper on the back corner of the doc feeder lid. It will work just fine while you wait on the part.
Sent from my XT1254 using Tapatalk
-
Re: Disable doc feeder on bh363?
You should be able to go to service mode and I believe system 2 look for adf settings and then just unset the feeder selected. Could be mistaken with the 224 models but worth a shot.
**turns out that's for 224 so yeah, double checked the manual and trouble isolation would be the way to go
Last edited by copyrooks; 08-06-2015 at 04:44 AM.
-
Trusted Tech
50+ Posts
- Rep Power
- 28
Re: Disable doc feeder on bh363?
Thanks Flash. Yep, another look at the manual and that's where it is. Yesterday I couldn't see it - HDTV (hump day tunnel vision) I guess - could only see Friday from there.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks