Konica Minolta C364e Web Service access port

[B0265]

Port 631 is for IPP and CUPS use the IPP protocol. I havn't played much with IPP ports but after checking the user manual for the e-series I would suggest that you try http://xxx.xxx.xxx.xxx/ipp or ipp://xxx.xxx.xxx.xxx/ipp.

[loza_copytech]

yes you are right.
ports 80 and 8080 are working but I look to a way to assign/add another port for this purpose.

On my C350, by the default, port 631 also was working and it was good for me.
I'm looking to find a way like that for C364e.
Attachment 30393

I found 631 from here on my last copier and it worked for me.

Hi Just saw your post im having issues getting the emails to send out on my C364e not sure if I need to port forward anything but shouldn't need to.
Is there any way you could send me some screen shots of your email settings minus the user name and passwords etc
or your configuration page. Is there anything you can think of that may be stopping it from working.I can send you my configuration page if you are willing, i understand if its too much trouble wont be offended.
are you using 587 tls or 465 ssl or 25, either way not working for me watched few online videos cant think of what im doing wrong.
I do this sort of stuff everyday with NVR cameras etc Ive never had this much trouble to get an email working on a device.

[Synthohol]

if you are trying to access the copiers web page, just remote into a PC there and open PSWC.
if you are trying to print try port 9100.

[allan]

For Email SMTP you need:

Gateway address.
DNS if server names are used or just use server IP.
SMTP server address.
Then to use the correct port.
Then if authentication is required the user name and password.

Make sure that the gateway address is configured.

No port forwarding used for email scan.

Try and setup a gmail account with less secure apps enabled and test with that.

[Synthohol]

Hi Just saw your post im having issues getting the emails to send out on my C364e not sure if I need to port forward anything but shouldn't need to.
Is there any way you could send me some screen shots of your email settings minus the user name and passwords etc
or your configuration page. Is there anything you can think of that may be stopping it from working.I can send you my configuration page if you are willing, i understand if its too much trouble wont be offended.
are you using 587 tls or 465 ssl or 25, either way not working for me watched few online videos cant think of what im doing wrong.
I do this sort of stuff everyday with NVR cameras etc Ive never had this much trouble to get an email working on a device.

you could start your own thread?

[loza_copytech]

you could start your own thread?

sorry newbie, I never understand how these sites work, how do create new thread

[Phil B.]

sorry newbie, I never understand how these sites work, how do create new thread

you should be able to find what you need here ---> https://www.copytechnet.com/forums/faq.php