Konica Minolta C364e Web Service access port

**dc-master** · 08-22-2015

Hello
In my office, I had a Konica Minolta C350 and recently I bought a C364e.
I have a network by shared IP (192.168.x.x) and an static valid IP set on my modem/router.
I am using port forwarding to access all devices and computers in my office from outside.
for accessing to web service on C350, I used port 631 by this way "my valid IP:631"
I tried to do same for C364e but no success.
Can anyone guide me which port can be using for C364e or how I can assign a port number to this purpose?

Thanks

**dc-master** · 08-22-2015

maybe I can say my question by the way:
If I want to access to web connection page by port number, is there any other port number except 80 or 8080? or how to can set the access port number?

**FixStuff** · 08-23-2015

It doesn't look like there's a way to change the web connection port number.

What is it you do remotely? There's also remote panel. I think you can change the remote panel port number.

Also, what if you enable ssl on web connection. I'm not sure if it follows standards, but if it does perhaps you could access it on port 443?

Just some thoughts.

**dc-master** · 08-23-2015

Thanks for your reply.
also I tried port 443 but again no success. May be I didn't do it correctly because I'm not expert on SSL settings.
As I know, should set the settings by [Network] - [RemotePanelSettings].
what I should write on server address? the default it is 0.0.0.0
Operating the Machine Control Panel Remotely

Mainly I'm using the web access to download the scan files that save on machine.
my staffs scan papers and save it on boxes and then I download them remotely.
Do you have any suggestion for this purpose?

Regards,

**emujo** · 08-24-2015

Can you access the MFPs webpage when you are on the local intranet? Emujo

**dc-master** · 08-24-2015

yes
locally I can access that by entering share IP (like 192.168.1.14) and I can access from outside by using port 80 (like 86.124.167.37:80)

but I need port 80 and 8080 to remote access on my router/modem

**emujo** · 08-24-2015

The web browser uses port 80 and 8080 (SSL). You can access the page via the intranet, and internet so it seems like it's working..Maybe I'm not sure of the question. Emujo

**dc-master** · 08-24-2015

yes you are right.
ports 80 and 8080 are working but I look to a way to assign/add another port for this purpose.

On my C350, by the default, port 631 also was working and it was good for me.
I'm looking to find a way like that for C364e.
Screen_Shot.jpg

I found 631 from here on my last copier and it worked for me.