Pages from C3100P Solutions.pdf
Here's the bulletin that references the spring and how it's supposed to address this issue. It's been awhile since we've messed with these and have since moved on to different makes and models.
Hi Guys,
Is this wrinkle ( Dent / curl) on the trailing edge?
Replace the highlighted below.
Screenshot_20201103-210325.jpg
Bad news guys. I changed spring A6DR702701 and still wrinkling paper
The original spring was red color, and new spring was red color, too. I think there was a good spring.
Now I try to change parts from "byronf" answer. But I must to order it.
That i saw at the machine, problem is at the exit roller - there the paper is twist a little at one side.
As "byronf" said, problem is at the exit roller, because the rollers opossite are not fiting to the exit rollers. The exit roller is faulty (maybe old material at the time).
Have anybody newer parts number?
Old one is not available in Minolta. Old one part number:
A0VD890102 - Paper exit Roller
Last edited by spree; 11-04-2020 at 01:36 PM.
How about putting shrinking tube around the roller to increase its size? Did similar in the very long ago past with analogs.
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
Bookmarks