C6500 with IC408 image corruption

[Specilist KVN]

My terminology might be different (not sold as Konica). We do not call it a ic408.

Here is our firmware history with the internal rip (hangs on back).
1.0
1.02
2.0

Also, my versions are dumbed down.

Firmware refers to the INTERNAL control of the MFP. This allows specific features and options to function properly.


The v1.1 refers to the FIERY system software.
The IC-408 is a Fiery, referred to as the Embedded. v1.1
The IC-305 is also a Fiery, but a more pwerful version and is an external server. v1.1a

The negative Image is caused by some machines getting out with bad colur boards in them. I had a brand new install not 2 weeks ago that required this part replaced.

Check with Japan or contact the Canadain Head Office and they will direct you to the actual solution.

[hosman80]

i have had this issue on three machines, tried reseating and replacing fiery cables but no luck. finally we fixed them replacing the image processing board IPB for an updated board. you have to open a ticket with tech support and then use that ticket number to order it online and they send it to you (FOC) free of charge.