Results 1 to 7 of 7
  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Oct 2008
    Location
    manchester
    Posts
    515
    Rep Power
    29

    km-C35 calibrating

    i have a km-c35 with a message on the screen saying calibrating constantly

    i updated the controller firmware last time this happened and the same fault has come back in a week later

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    1,059
    Rep Power
    35

    Re: km-C35 calibrating

    I have cleaned all the laser slits and sensors that look for the pattern to fix this... What steps have you taken besides firmware?

  3. #3
    Field Supervisor 500+ Posts
    Join Date
    Oct 2008
    Location
    manchester
    Posts
    515
    Rep Power
    29

    Re: km-C35 calibrating

    Quote Originally Posted by mo0651 View Post
    I have cleaned all the laser slits and sensors that look for the pattern to fix this... What steps have you taken besides firmware?
    i did clean the laser slit glasses but will check it again and thats all ive done

  4. #4
    Service Manager 1,000+ Posts
    km-C35  calibrating

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,027
    Rep Power
    50

    Re: km-C35 calibrating

    Check the waste box. Has it been emptied recently?
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  5. #5
    Step aside, noob 1,000+ Posts EarthKmTech's Avatar
    Join Date
    May 2009
    Location
    Gigety
    Posts
    1,982
    Rep Power
    57

    Re: km-C35 calibrating

    run test prints for all 4 colours - this fault occurs on the c35 /c25 when there is a print quality issue present it cant deal with and the machine is too stupid to know what to do.

    Errors are recorded in hex on the event log from memory and you have to convert them to decimal to know what its complaining about - absolute p.o.s.
    If at first you don't succeed, try the way I told you how to do it in the first place.

  6. #6
    Field Supervisor 500+ Posts Zeldaman's Avatar
    Join Date
    Mar 2011
    Location
    Stuttgart/Baden Wuerttemberg
    Posts
    891
    Rep Power
    36

    Re: km-C35 calibrating

    Hi there!
    In 90% "permanent calibrating" on these bitc... the scannerlamp goes down (too old....). Change it (pn A121PP0F00), and itīs running again.
    Hope this will help.
    Greetings...

  7. #7
    Senior Tech 100+ Posts
    km-C35  calibrating

    Ben Around's Avatar
    Join Date
    Apr 2012
    Posts
    130
    Rep Power
    19

    Re: km-C35 calibrating

    I have seen this before. It's been awhile but if I remember correctly. In an attempt to avoid changing the lamp or scanner unit. I opened the scanner unit and cleaned scanner glass, white reference plate, scanner lamp, etc. It took care of the problem for me.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here