Results 1 to 5 of 5
  1. #1
    Junior Member
    Join Date
    Feb 2016
    Posts
    4
    Rep Power
    0

    Bizhub C308 Error code 6755 while DF-704 is mounted

    I have a C308, Error 6755. I have replaced the ADF (twice all three ADFs were new out of the box), replaced MFP, cleared error codes, flashed new firmware, still getting same error code when starting it up. If I leave the lid up while it is turning on, it does not error, and I am able to scan using the ADF with no image quality issues, no problems at all. If lid is closed it will error every time. If ADF is not mounted, it does not error. I have gone through the manual and found that the GAIN values for the CCD do not match what they should be on the B0 and BE, (manual says minimum of 70 I am getting low 50's to 63) also the CLAMP values are all 0 on the CCD. but according to the manual and KM tech support the problem is in the CIS (which I have replaced everytime I have tried a new ADF)

    I appreciate any suggestions, Thank you

  2. #2
    Technician pappyvonsillypants's Avatar
    Join Date
    Feb 2013
    Location
    finksburg
    Posts
    16
    Rep Power
    18

    Re: Bizhub C308 Error code 6755 while DF-704 is mounted

    any resolution to this??? I am having same issue!

  3. #3
    Service Manager 10,000+ Posts
    Bizhub C308 Error code 6755 while DF-704 is mounted

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,612
    Rep Power
    389

    Re: Bizhub C308 Error code 6755 while DF-704 is mounted

    Quote Originally Posted by pappyvonsillypants View Post
    any resolution to this??? I am having same issue!
    Feb 2016
    I'd say he did and just not reported back.. or...
    Best to start a new thread of your own

    Sent from my SM-G960U using Tapatalk

  4. #4
    Service Manager 2,500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    4,492
    Rep Power
    201

    Re: Bizhub C308 Error code 6755 while DF-704 is mounted

    Quote Originally Posted by pappyvonsillypants View Post
    any resolution to this??? I am having same issue!
    What have you done so far?
    This DF uses additional dual scan board which is known to be sort of all kind of weird issues.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  5. #5
    Technician pappyvonsillypants's Avatar
    Join Date
    Feb 2013
    Location
    finksburg
    Posts
    16
    Rep Power
    18

    Re: Bizhub C308 Error code 6755 while DF-704 is mounted

    the board is my next step! Unfortunately the customer owes us a bunch of money so I am not going back out until they pay up.
    After doing some digging in manual etc, I am going to bring the board. thank you so much for fast reply! I should probably help others out more on here myself. 20 years on Konica Minolta equipment. I should get more involved!!

    I will let you know my findings!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here