Movie Data File Konica Minolta bizhub C224 and bizhub 363

[Synthohol]

Thanks for your reply, I do have the movie data for the C224 and 363. However I just ran into a situation that I need firmware for the bizhub 222. Our copy is corrupt. please forward if available to johva@ameritech.net. Thank you, johva.

Release Notes: 222, 282, 362 MSC Phase 2.0 Firmware Version 08
CAUTION: You CANNOT upgrade Phase 1.0 machines to Phase 2.0 level firmware Phase 2 serial number cut in: From "A11W011002051" onward => bizhub 222 Phase2 From "A11V011001338" onward => bizhub 282 Phase2 From "A11U011001706" onward => bizhub 362 Phase2 Serial numbers below are Phase 1 systems. SEE DLBT0902293EN00.pdf for a list of enhancements


Release Notes: 222, 282, 362 MSC Phase 2.0 Firmware Version 06
CAUTION: You CANNOT upgrade Phase 1.0 machines to Phase 2.0 level firmware Phase 2 serial number cut in: From "A11W011002051" onward => bizhub 222 Phase2 From "A11V011001338" onward => bizhub 282 Phase2 From "A11U011001706" onward => bizhub 362 Phase2 Serial numbers below are Phase 1 systems. SEE DLBT0901286EN00.pdf for a list of enhancements

Release Notes: bizhub 222, 282, 362 MSC Firmware PHASE 1 Version 00
CAUTION: You CANNOT upgrade Phase 1.0 machines to Phase 2.0 level firmware Phase 2 serial number cut in: From "A11W011002051" onward => bizhub 222 Phase2 From "A11V011001338" onward => bizhub 282 Phase2 From "A11U011001706" onward => bizhub 362 Phase2 Serial numbers below are Phase 1 systems.

be careful which firmware you try and use!!!

that whole series sucked for firmware.
lemme know if you need the actual bulletins.

[johva]

Synthohol :
Duplex 1.jpg

I'm not sure my problem is with the firmware. bizhub 222. The Simplex/Duplex application screen, Original reads single sided - double sided, Copy reads single sided, double sided is MISSING. Any thoughts, please let me know. Thank you, johva.

[copier tech]

Synthohol :
Duplex 1.jpg

I'm not sure my problem is with the firmware. bizhub 222. The Simplex/Duplex application screen, Original reads single sided - double sided, Copy reads single sided, double sided is MISSING. Any thoughts, please let me know. Thank you, johva.

Start a new thread & include the model number.

[copier addict]

Synthohol :
Duplex 1.jpg

I'm not sure my problem is with the firmware. bizhub 222. The Simplex/Duplex application screen, Original reads single sided - double sided, Copy reads single sided, double sided is MISSING. Any thoughts, please let me know. Thank you, johva.

This symptom is usually caused by a DF problem

[mihailelea]

Hello
I have bought a KM Bizhub C364 second hand and I think the HDD was formated.
I have the following error messages:
"OCR Dictionary not found. Contact your Service Representative";
"No Animation Guide available. Contact your service rep." and
"Please turn on the Modem Unit"

If someone could please send me the software to install I would be very grateful
I think after watching 3 days of tutorials and searching the web I know how to install, but I need the software.
Thank you!

my e-mail: mihailelea@yahoo.com

[PinkPanther]

hello,
i have the same problem here with my c224 (the replacemant for my c203)


The former owner did for security, and to clean user adjustments, a HDD format.
So far so good, but as you now, the movie file is lost after.


Does somebody of you have the Movie file for the c224?

I have service documentation, but I do not have the movie-file




Thank you in advance.

[copier tech]

You can ignore that “animation missing” message the machine will work fine.

However if you want the fw to remove the message see link below.

[Rylac]

Would anyone be able.to help me out with a C284 movie files?
Seems they are different than the c364 movie files.
Thanks in advance

[PinkPanther]

Hi Rylac,

check your inbox. :-)

[pannoniapeter]

Hi!

New to this forum, glad I found it thoug!
Recently bought a secondhand C224, and it does complain about the Animation

Could somebody send me the Movie Data File, please?

Thanks in advance!
Peter

ROM versions:
MFP Card Version A1610Y0-F000-GF4-72-970
MFP Controller BOOT Program A2X00Y0-1E00-G00-01(00)
MFP Controller Linux Base Linux-2.6.26.8-rt16
MFP Controller Kernel Program A2XK0Y0-1C00-GC2-19
MFP Controller SubSet A2XK0Y0-1F00-G00-08(00)
MFP Controller A2XK0Y0-0100-GF4-72(00)
Operation Panel Message Data A2XK0Y0-8100-GCZ-72-970
Fax Board Controller1 A22M0Y0-4000-GCA-11(00)
Fax Board Controller2
Scanner A2XK0Y0-0023-G00-11
Printer A1610Y0-0050-GD1-32
ADF A3CF0Y0-0024-G00-16
Finisher
RU
ZU
Panel CPU A1610Y0-8900-G61-00
DSC1
DSC2

Loadable Device Driver1
Loadable Device Driver2
SD
Voice Data
Movie Data
Dictionary Data
OCR Library
MFP Controller System A2XK0Y0-1000-GF4-72(00)
MFP Controller Print Controller A2XK0Y0-3000-G00-BR
MFP Controller Print Controller Font A2XK0Y0-3F00-G00-2B
MFP Controller Print Controller Demo Page A2XK0Y0-3E00-G00-01
MFP Controller MIO A2XK0Y0-5000-G01-X1(00)
MFP Controller PIC A2XK0Y0-8200-GC2-13