Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician GeorgeK's Avatar
    Join Date
    Sep 2008
    New Smirni, Athens
    Rep Power

    BH500 vertical lines PRINT ONLY

    Appreciate your help.

    On a bizhub 500 I have the intermittent vertical lines (as per attachment) only in printouts.
    Copies are just fine.

    Any suggestions ?

    Thanks in advance for your help.
    Attached Files Attached Files
    TECHNICIAN noon. (tek~nish~uh n)
    A person who fixes the mistakes made by engineers.

  2. #2
    Certified Konica Expert 2,500+ Posts
    BH500 vertical lines PRINT ONLY

    Synthohol's Avatar
    Join Date
    Mar 2016
    North Jersey
    Rep Power

    Re: BH500 vertical lines PRINT ONLY

    i would check the drum surface, can you print a blank 11x17 or A3 to see if the marks repeat?

  3. #3
    Senior Tech 250+ Posts
    BH500 vertical lines PRINT ONLY

    DigiMan's Avatar
    Join Date
    Jan 2013
    In a gadda da vida
    Rep Power

    Re: BH500 vertical lines PRINT ONLY

    Had the exact same thing on a bh 283.
    No (obvious)marks on drum but changing the drum resolved the issue.
    After 20-30k exactly the same,only guess was that the dev tank was causing it.
    Changed the drum again and haven't had a problem since.Weird.
    Try to swap a drum from another machine if possible.
    I don't like the new copier I just bought. It says "put face down" but every time I do it, it blinds my eyes.

  4. #4

    Re: BH500 vertical lines PRINT ONLY

    After checking drum.....i would check the laser assembly

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=

IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here