you have to get the link in the bulliten for replacing the mfb on the site
A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 3 years.
My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...
Dear Friends
We have Develop Ineo+ 284E since i dont have CE password I flashed reset tool, A145FW.tar file ater that printer is restarting after the first block is appearing can hear Exposure lamp is coming on and initializing the carriage at this moment it is restarting any help please
The post by Femaster warned about an end user getting the file and wreaking havoc with their machine.
I would guess you are not a tech since you are not aware of the default CE password and that you did not correctly follow the reset procedure and wait for the "Restore" to reboot a couple of times to transfer the data from the SSD to the MFP board after it was reset.
I sympathize with your situation but this is why non Konica tech's should never try and mess with firmware or service mode.
(and that CE password has been posted so many times here on copytechnet and online that a quick google search would have given you that info or you could buy the service manual online for next to nothing. Never work on a copier if you don't even have the manual)
But,sadly, I don't think having service mode access will help you to recover from your current situation. You could try the reset tool again and see if it will load and do the reset and then the restore correctly.
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
that screwdriver guy put the file up for public use.
once again i ask why this thread isnt locked and that attachment above removed.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
We lost the CE Password some one changed it thats why I used the NVRAM tool with doubt whether it will work or not with Develop machine
When I flashed Reset tool file it says Data copied then I restarted the machine hoping that restore message will come but it was keep rebooting. I am not sure that the file i used is for KM 284 e machine don't know whether It will work with Develop 284E
Be cool It is my own printer and I am learning hope you all had same experience at least one point of time in your life so no more complaining Enjoy the life with simple way
Last edited by rkamvsjj; 03-19-2020 at 05:22 PM.
Yes I read the document some thing I missed . Any way thanks for the concerns you all are having
Bookmarks