Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17
  1. #11
    Service Manager 1,000+ Posts
    bizhub 200  touch screen adjustment


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: bizhub 200 touch screen adjustment

    I agree replacement of the screen is ultimately unavoidable but just a tip to run a thin ID card under & around the perimeter for any gunk.

  2. #12
    Service Manager 2,500+ Posts
    bizhub 200  touch screen adjustment


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    3,831
    Rep Power
    133

    Re: bizhub 200 touch screen adjustment

    Quote Originally Posted by JR2ALTA View Post
    I agree replacement of the screen is ultimately unavoidable but just a tip to run a thin ID card under & around the perimeter for any gunk.
    JR2 suggestion is worth a try. Problem with OEM touch screen was the foil pattern lifting off board from heat. Back when I was working on these I must of replaced at least 50 of these touch screens. Once replaced with aftermarket never had to replace again. It was a poor designed OEM part. This was one case where the aftermarket was better than OEM !! And less expensive, Think the OEM touch screen was around $200 back then.

  3. #13
    Senior Tech 250+ Posts
    Join Date
    Oct 2008
    Location
    Long Island, NY
    Posts
    436
    Rep Power
    37

    Re: bizhub 200 touch screen adjustment

    Quote Originally Posted by tsbservice View Post
    Maybe with some trials you can guess/hit where to touch display instead of [END].
    This is what I wound up doing. Just by pure luck I got it, but it took like five minutes of poking around on the screen.

  4. #14
    Master Of The Obvious 10,000+ Posts
    bizhub 200  touch screen adjustment

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: bizhub 200 touch screen adjustment

    Funny story:

    I had a billable customer that used his bizhub 200 only for printing, so when it had an error message (sorry, can't remember which) this customer expected me to install a new control panel only long enough to reset the error, then put that new panel back on my shelf at no charge. I found this request quite funny. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #15
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,100
    Rep Power
    346

    Re: bizhub 200 touch screen adjustment

    Quote Originally Posted by blackcat4866 View Post
    Funny story:

    I had a billable customer that used his bizhub 200 only for printing, so when it had an error message (sorry, can't remember which) this customer expected me to install a new control panel only long enough to reset the error, then put that new panel back on my shelf at no charge. I found this request quite funny. =^..^=
    Funny indeed but I will call this person quite impudent
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  6. #16
    Service Manager 2,500+ Posts
    bizhub 200  touch screen adjustment


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    3,831
    Rep Power
    133

    Re: bizhub 200 touch screen adjustment

    Quote Originally Posted by blackcat4866 View Post
    Funny story:

    I had a billable customer that used his bizhub 200 only for printing, so when it had an error message (sorry, can't remember which) this customer expected me to install a new control panel only long enough to reset the error, then put that new panel back on my shelf at no charge. I found this request quite funny. =^..^=
    I was waiting for the punch line....what did you end up doing? Did he buy a new touch screen?

  7. #17
    Master Of The Obvious 10,000+ Posts
    bizhub 200  touch screen adjustment

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: bizhub 200 touch screen adjustment

    He did not buy the panel. The story ends there ... because I don't know another ending. I'll guess that it was junked ... unless there's a tech stupid enough to do what he wanted. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here