misalignment on C754

[Service@PRT]

Hi Allan, may i know what "BC" is?

Are u referring to the Fuser speed in Service mode>>Machine>>Fusing Transport Speed?

I cant seem to modify it. Plain Paper is -10, Thick 1 is 20, Thick 2 to 4 is 10.

Just an update - i have been printing the sample in succession with no changes of any settings and i noticed that the misalignment are not consistent.
There is a portion where misalignment is less, more and some portion where almost aligned.

he is refering to blackcat reply.

[copier tech]

If you're saying this machine has done 924k & never had the ITB replaced? That is your issue, you cant clean a worn belt.

[methogod]

Does it only do this on thick 2?
What brand paper?

Simple only or duplex as well...

[vishop]

If you're saying this machine has done 924k & never had the ITB replaced? That is your issue, you cant clean a worn belt.

yeah that could be where the problem is. i dont intend to clean the belt, just the rollers inside of it maybe some slippage is happening somewhere. anyway i have requested for a new ITB for replacement.
We'll see when it gets here.

Thanks all for the input

[vishop]

Does it only do this on thick 2?
What brand paper?

Simple only or duplex as well...

Happens only on Thick settings, Plain Paper settings has no issues at all. Have tried different kinds of paper.

[copytrust]

Hey guys did you manage to fix this problem? i am having the same problem, i know it s been 2 years! any help will be appreciated.

[and]

I know is a old post... Same issue!
Any help?

[copier tech]

I know is a old post... Same issue!
Any help?

Start a new thread or at least state what you have tried or replaced!?

[and]

25k black
190k color

I have replaced IU C/M/Y

Printing 80gsm no problem
Printing with Thick 2 i am getting a misalignment.

[copier tech]

25k black
190k color

I have replaced IU C/M/Y

Printing 80gsm no problem
Printing with Thick 2 i am getting a misalignment.

Might be fuser offset issue if only on heavy media?