Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: faint coloured

  1. #1
    Junior Member
    Join Date
    Feb 2017
    Location
    Tehran
    Posts
    6
    Rep Power
    0

    faint coloured

    Konica Minolta c452
    I have this faint band in 4 colours test.
    Attached Images Attached Images

  2. #2
    Certified Konica Expert 2,500+ Posts
    faint coloured

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,983
    Rep Power
    217

    Re: faint coloured

    there is a setting for adjusting transfer voltage of trail edge.


  3. #3
    Master Of The Obvious 10,000+ Posts
    faint coloured

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,468
    Rep Power
    463

    Re: faint coloured

    Is you faint area in which direction on which size paper? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Certified Konica Expert 2,500+ Posts
    faint coloured

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,983
    Rep Power
    217

    Re: faint coloured

    good question!
    i just assumed it was the trailing edge from memory of that image.

  5. #5
    Junior Member
    Join Date
    Feb 2017
    Location
    Tehran
    Posts
    6
    Rep Power
    0

    Re: faint coloured

    Quote Originally Posted by blackcat4866 View Post
    Is you faint area in which direction on which size paper? =^..^=
    A4 & bigger than A4

  6. #6
    Certified Konica Expert 2,500+ Posts
    faint coloured

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,983
    Rep Power
    217

    Re: faint coloured

    the stripe, is it in the feed or cross direction was the question.

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Oct 2011
    Posts
    50
    Rep Power
    26

    Re: faint coloured

    It may be dirt in the optics of the laser, it has to be disassembled and cleaned well

  8. #8
    Aging Tech 10,000+ Posts
    faint coloured

    copier addict's Avatar
    Join Date
    Jul 2013
    Location
    Diamond
    Posts
    11,981
    Rep Power
    324

    Re: faint coloured

    If it is on all colours, I would suspect the transfer belt or roller. Also, use the magic wand on the inside of the door to clean the printheads.

  9. #9
    Master Of The Obvious 10,000+ Posts
    faint coloured

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,468
    Rep Power
    463

    Re: faint coloured

    I can wait for the details. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  10. #10
    Technician
    Join Date
    Jun 2015
    Location
    Tehran
    Posts
    34
    Rep Power
    18

    Re: faint coloured

    I've got the same problem, change anything you name it but no luck.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here