Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: CS Remote Care

  1. #1
    Trusted Tech 50+ Posts Eugene74's Avatar
    Join Date
    Jan 2010
    Location
    George
    Posts
    70
    Rep Power
    29

    CS Remote Care

    Good Day All,

    We've been task to connect a machine (B287) with CSRC via Email (1-way communication), we've been given all the server settings (SMTP address and authentication credetials) the client need this to be connected via TSL protocol over port 25. We can't find any place to specify TSL protocol (like in scan to email, were this is available) and if we leave it on port 25 we get connection error and if we change it to 587 (default TSL port number) we also get a connection error. We went through the soft switched in the service manual and there are no switch to activate TSL or even a place were we could load a TSL certificate.

    Does anyone else had such a problem before or could you please point s in the right direction.

    Many thanks,
    Eugene.

  2. #2
    Certified Konica Expert 2,500+ Posts
    CS Remote Care

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,983
    Rep Power
    217

    Re: CS Remote Care

    maybe this will help?

  3. #3
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    97

    Re: CS Remote Care

    CSRC (or Vcare) is designed to work with KM servers, and you can use KMs vcare email server to send the notifications. You may also use the customers mail server to send the same notifications, but they still need to go to the KM email address. CSRC does not support TLS at this time, and since the preferred method of sending is via HTTP or HTTP(s), I doubt that they are going to replace the system with one that can accept an email over TLS. If you are just trying to send meter/consumable info why not use the PSWC settings for notifications. Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

  4. #4
    Trusted Tech 50+ Posts Eugene74's Avatar
    Join Date
    Jan 2010
    Location
    George
    Posts
    70
    Rep Power
    29

    Re: CS Remote Care

    Thank you for your input. The customer's currently on notification via email, but requested changing it over to VCare. I'm sure the developers will not do adjustments on a system that works for only one machine. The customer just need to work like they currently do or need to open port 25 without any security protocol enabled.

    Once again thanks.

  5. #5
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    97

    Re: CS Remote Care

    Then you have your answer, and I'm still not sure why TLS is part of the question...KM will accept the mail over port 25 or 2525, you are correct, the customer just needs to open the ports, BUT, the C227 can send via HTTP or HTTPs. Why not send using this method? The MFP just needs an connection to the outside world. IF it's a security concern, KM can provide the vcare white papers showing vcare is pretty secure using either mode. Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here