Thanks:
0
Likes:
0
Dislikes:
0
-
C3350- no colours
Hi all.
I have a C3350 that while producing K prints fine, has no colour reproduction.
There are no colours appearing when printing the test patterns. In addition if I do a forced stop, there is no toner on the belt.
The drums are rotating and there are no error codes. The strange thing is that after being on site for a couple of hours it did four or so colour prints but then went back to the fault condition.
I have a feeling there may be a loose connection somewhere but I would be interested to see if anyone has had something similar.
No parts have been replaced as of yet.
I look forward to your comments...
-
Trusted Tech
50+ Posts
- Rep Power
- 0
Re: C3350- no colours
Hello,
First I would check the mechanic for the color units, maybe some gear is demage.
And then I will try HV Unit
-
Technician
- Rep Power
- 21
Re: C3350- no colours
Try image belt unit. If not HV unit or main dev drive motor then main drive.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks