I have connected bizhub 600 directly with pic via Ethernet cable.i put the IP address in browser but nothing happens.to find the ip of bizhub I go to utility...administrator setting....network settings...
tcp/ip setting .....
I have connected bizhub 600 directly with pic via Ethernet cable.i put the IP address in browser but nothing happens.to find the ip of bizhub I go to utility...administrator setting....network settings...
tcp/ip setting .....
You mean directly to PC from your machine. If you set static ip address to your copier then from pc, you need manually assign too., Go to local area connection then tcp/IPv4 set assign ip address manually if you are giving to the machine 192.168.100.10 then from pc should be 192.168.100.11.........try to ping.. Good luck
Does it have the IC-202 Print Controller option? Base models cannot print. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Sorry, not true.
Nope. You need the IC-202 for scanning. Maybe you could do some of this research yourself, like Google? That's how I found out: http://www.copycom.eu/storage/app/me.../km-bh-750.pdf
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
IIRC you can update the firmware with the standard network port but nothing else.
Bookmarks