Bizhub 240f, firmware

[Hansoon]

I had one restarting problem (boot loop) on 240f and solve with replacing cf card from other scrap machine and it works.
Do not know is that your problem but just a hint.
What firmware version you have now?
You tried few different usb memory for firmware upload?

Changed the CF-Card and machine came up. However there was an error message "501" firmware not matching. Tried to update the FW on that CF-Card from the scrap machine but it says "NG"

The firmware available to me is:

240f_EUR_D0A0A0_update.bin
240fEUR_Ver.txt

and

FWUD.bin
MB750_Ver.txt

I use a 2GB USB Stick

Any help please?

Hans

[Toxic]

About the 501 error,it could be different firmware version on current machine and donor machine cf card.
Check and match all 3 fw versions 240f,MB750,OP700
Try to get cf card back to donor machine and update firmware to be the same versions as on the other machine and try then replacing cf card again.
When you get NG during did you check error code ? (The datailed errror code will be displayed when you press <Setting>, <*>, <9>, <8>.)
If not try to disconnect lan cable before firmware update.
Also try manual mode method fw update if auto not working.

[Hansoon]

The little creep is back on his feet. Changed the CF-Card and updated the firmware once again but now more careful than the 1st time.......

Thanks for your help guys.

BTW: I have following FW, are these the latest & greatest, or is there "better" ?

240f_EUR_D0A0A0 and
MB750_B9A0A0
But unfortunately not the PCL OP700_EN



Hans

[Xthedev]

PLEASE the mega link provided is no longer working and i need the firmware file. Anybody...please

[mbr002]

Is anybody able to send me the firmware for the KonicaMinolta 240f please? The machine shows the logo and stops with MB system error 12500. At CF card is written MB-750 - B3A0A0, before failure the machine reported


Main 240f EUR E4A0A0
Network MB750 C9A0A0
PCL OP700 EN B1A0A0


It seems to be a problem in network section, the checksum is missing.




Thank you
Martin

[Phil B.]

Is anybody able to send me the firmware for the KonicaMinolta 240f please? The machine shows the logo and stops with MB system error 12500. At CF card is written MB-750 - B3A0A0, before failure the machine reported
Main 240f EUR E4A0A0
Network MB750 C9A0A0
PCL OP700 EN B1A0A0
It seems to be a problem in network section, the checksum is missing.
Thank you
Martin

FYI CONTRIBUTORS to CTN get a quicker response to such requests.. https://www.copytechnet.com/forums/v....php?do=donate

[Phil B.]

PLEASE the mega link provided is no longer working and i need the firmware file. Anybody...please

FYI CONTRIBUTORS to CTN get a quicker response to such requests.. https://www.copytechnet.com/forums/v....php?do=donate

that link was from 2017.. of course it is no longer any good.

[mbr002]

FYI CONTRIBUTORS to CTN get a quicker response to such requests.. https://www.copytechnet.com/forums/v....php?do=donate

O.K., it's not a problem to support the forum, but I have to be sure that the firmware files will help me at least a little

[copier tech]

O.K., it's not a problem to support the forum, but I have to be sure that the firmware files will help me at least a little

We can supply you with the latest firmware however it's not a guaranteed fix, you could have a failed controller board.

Firmware Update - Printer & Copier Firmware

[Toxic]

O.K., it's not a problem to support the forum, but I have to be sure that the firmware files will help me at least a little

In that case you are at wrong place.
If you call KM official tech guy to solve problem (for labour fee of course) maybe he will give you some sort of guarantee.