c224e counter reset

**enricocopyline** · 11-05-2018

can anyone help me?
even in private ....

**Zesti** · 11-05-2018

Copy Line
I'm an electronics engineer, I can also understand ur request COPY line, will u pl. explain a bit the project of robotics. May be I can suggest u better way out.

**enricocopyline** · 11-07-2018

robots are packaging robots. I need to reset because the machine counts must start in step with the robot counts. For this to do some tests I studied the Konica 4 series for their reliability and to change the copier I would have to redo all the projects from scratch.
other photocopiers it is very easy to start the counts from 0

do the reset I need on these two photocopiers to do the tests of the operation and no fraud is enough.

sorry for my English.

**asdexed** · 01-03-2020

Sorry

**tsbservice** · 01-03-2020

Originally Posted by asdexed

Hello! I can count to 0 or the number entered.
All models !!! C250I c224e 224 223 s.t.bPrice: 2500 GBP . Pay Pal
Hello! I can count to 0 or the number entered. All models !!!Price: 2500 GBP to huf!

Usually I don't like to use red flags but this one is an exception. Reported also!

**Copier repairman** · 01-04-2020

Originally Posted by enricocopyline

in usb1 and usb2 are there any recovery firmware? Where can I find them?
A new ssd and mfb reset tool dove li trovo?

USB1 : A1UDFW.tar
USB2 : bizhub C224e NVRAM reset tool

A0P00Y0-F000-GQ7-D1.exe
A1DM0Y0-F000-GQ7-D1.exe
A0ED0Y0-F000-GQ7-D1.exe
A2WU0Y0-F000-GPD-F9.exe
A1UD0Y0-F000-GQ7-D1.exe

Happy New Year

**asdexed** · 01-04-2020

Its very easy counter modify. ALL 4 method can

**habik** · 01-04-2020

Originally Posted by enricocopyline

robots are packaging robots. I need to reset because the machine counts must start in step with the robot counts. For this to do some tests I studied the Konica 4 series for their reliability and to change the copier I would have to redo all the projects from scratch.
other photocopiers it is very easy to start the counts from 0

do the reset I need on these two photocopiers to do the tests of the operation and no fraud is enough.

sorry for my English.

Are you saying that the logic you incorporated into your robotic packaging system needs output from copier as count 0 ?
Why can't you just use the standard counter system that was developed by the manufacturer specifically for this reason, where you can reset the count at which ever point you want! No need to fuck with FW or SSD or eMMC's.

Sent from portable device using fast cheapset!

**asdexed** · 01-04-2020

Originally Posted by habik

Are you saying that the logic you incorporated into your robotic packaging system needs output from copier as count 0 ?
Why can't you just use the standard counter system that was developed by the manufacturer specifically for this reason, where you can reset the count at which ever point you want! No need to fuck with FW or SSD or eMMC's.

Sent from portable device using fast cheapset!

No need to replace anything. You need 1 laptop or a flash drive.
Counter is 0 because it is a hiring machine. Easier to bill.