Page 3 of 3 FirstFirst 123
Results 21 to 28 of 28
  1. #21
    Technician
    Join Date
    Nov 2010
    Location
    melbourne
    Posts
    38
    Rep Power
    19

    Re: C258 won't boot / stuck at 2 bars

    2 Shark fins is usually MMC / SSD requires replacement. Rule out others by trying other memory and disconnecting the HDD. Also ensure network is disconnected. I have heard a couple of rare cases where the DS board in the back for the ADF CCD causes this issue.

  2. #22
    Field Supervisor 500+ Posts kingarthur's Avatar
    Join Date
    Feb 2008
    Posts
    783
    Rep Power
    36

    Re: C258 won't boot / stuck at 2 bars

    Quote Originally Posted by spock View Post
    2 Shark fins is usually MMC / SSD requires replacement. Rule out others by trying other memory and disconnecting the HDD. Also ensure network is disconnected. I have heard a couple of rare cases where the DS board in the back for the ADF CCD causes this issue.
    It was the DS board when I had a C368 doing the same, even when I told the m/c it no longer had an RADF, it still happened, I had to physically remove the board to stop it happening.
    Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away...

  3. #23
    Senior Tech 100+ Posts Mitch Barron's Avatar
    Join Date
    Mar 2013
    Location
    Näfels
    Posts
    131
    Rep Power
    16

    Re: C258 won't boot / stuck at 2 bars

    Definitely the ssd. Ask your supplier to organize one. They should have a specific order code to organize a new one. I just had one crap out on me and I was experiencing the same symptoms as you. Hope you get er done! All the best!

  4. #24
    Trusted Tech 50+ Posts
    Join Date
    Jul 2008
    Location
    Budapest
    Posts
    63
    Rep Power
    24

    Re: C258 won't boot / stuck at 2 bars

    CSES

    DLEU1606742EN
    SATA Controller rewriting tool, MFPB reset tool, Boot ROM update firmware G00-02

    Gergő

  5. #25
    Junior Member
    Join Date
    Jan 2019
    Posts
    2
    Rep Power
    0

    Re: C258 won't boot / stuck at 2 bars

    Can I share a789be.tar reset firmware?
    I also have machine can not boot, please

  6. #26
    Field Supervisor 500+ Posts
    C258 won't boot / stuck at 2 bars

    copytechman's Avatar
    Join Date
    Nov 2008
    Location
    Barrie, Ontario
    Posts
    807
    Rep Power
    31

    Re: C258 won't boot / stuck at 2 bars

    I had a c287 (same series) with this issue, it was the emmc board for ours.

    Regards
    A.

  7. #27
    Service Manager 5,000+ Posts
    C258 won't boot / stuck at 2 bars

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    6,566
    Rep Power
    127

    Re: C258 won't boot / stuck at 2 bars

    Quote Originally Posted by fyjxt View Post
    Can I share a789be.tar reset firmware?
    I also have machine can not boot, please

    FYI:

    http://www.copytechnet.com/forums/misc.php?do=vsarules

    admins request such activity be carried out thru PM

  8. #28
    Technician
    Join Date
    Feb 2014
    Posts
    25
    Rep Power
    13

    Re: C258 won't boot / stuck at 2 bars

    [QUOTE=copytechman;732458]I had a c287 (same series) with this issue, it was the emmc board for ours.

    Regards
    A.[/QUOTE


    Same here with regard to the eMMC board on a Olivetti MF223 / Konica C227. replaced the MFP first and had exactly same symptom. started with the SATA then tried the eMMC.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here