C6500 install. Fiery and driver cannot locate Printers IP address.

[Synthohol]

The machine cannot print on its own. It needs a fiery or the cappy ic 601 controller.
We have to get the fiery to print a configuration page. Please post one once you do that and we can go from there.
I think there is hope but I need pics or be very specific.
Take pictures.
You said no to browser. Why? Did you try using the fiery ip in the address bar?
Help me help you.

[swaggen]

Hey Guys thank you for taking the time to do this.

The browser cannot locate the IP address either. I asked the cable company about the Fiery IP address which is 192.168.3.200 , which they can see that its plugged into my 1 gig switch. Why I cant see it? Even when entering it into my browser is a mystery.

Here is all the pictures you requested.

7ff

I had the wrong version of the workstation. I have the correct version now. Still it cannot locate the IP.

I have also tried going straight to the modem/router and bi-passed the switch. Nothing. Same

I will get this POS solved!

[Synthohol]

ok, now we are getting somewhere, run IPCONFIG from a dos prompt and see if the computers wired local area connection IP starts with 192.168.3.x
if any of those 3 are different thats why you cant see it.
let me know.

[swaggen]

ok, now we are getting somewhere, run IPCONFIG from a dos prompt and see if the computers wired local area connection IP starts with 192.168.3.x
if any of those 3 are different thats why you cant see it.
let me know.

Ok I for some reason cant see where your headed yet...but I am excited.... IP config is in the same link now.


7ff

[Synthohol]

if the other pics in your dropbox are with regard to this post then thats why. your local IP addy is 192.168.0.x
its not the same as the fiery's x.x.3.x subnet.
either find a way to change it in server setup through the LCD panel or manually change a computers IP to 192.168.3.200 subnet mask 255.255.255.0 and leave gateway blank, its irrelevant for our purposes.
then open a browser or use CWS and get to the fiery server setup/configure and assign a local IP like 192.168.0.whatever not currently used and unassigned out of the DHCP range)
reboot fiery and you will be 90% there.
let me know.

just happy we made headway today.

[Synthohol]

in a typical network the first 3 "octets" in an IP must match every other IP based appliance or PC in order to be seen on that "subnet"
the fiery is x.x.3.x but your network is x.x.0.x the 3rd digit or octet is not the same it wont ever be seen on the local network. (x.x.0.x)

[swaggen]

in a typical network the first 3 "octets" in an IP must match every other IP based appliance or PC in order to be seen on that "subnet"
the fiery is x.x.3.x but your network is x.x.0.x the 3rd digit or octet is not the same it wont ever be seen on the local network. (x.x.0.x)

Ok ,.. what is the suggestion to correct it?

[Synthohol]

find a way to change it in server setup through the LCD panel or manually change a computers IP to 192.168.3.200 subnet mask 255.255.255.0 and leave gateway blank, its irrelevant for our purposes.
then open a browser or use CWS and get to the fiery server setup/configure and assign a local IP like 192.168.0.whatever not currently used and unassigned out of the DHCP range)
reboot fiery and you will be 90% there.
let me know.

i just said it

[swaggen]

i just said it

The what I understand . The how to fix is the problem for me... .



Ok ... so I need to change it on the fiery?

Create a different network to the proper octets ?


As you can tell Im the least technical person on planet earth.

[swaggen]

I see no way to change the Fiery IP address.

I see a way to change the Copier IP address.

If I need to set the PC IP.... then Im seeing some way to change it on line. What is does the rest of my network is unclear.