Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Senior Tech 100+ Posts
    Join Date
    Jun 2012
    Posts
    169
    Rep Power
    0

    Re: koinca minolta c3100p lines on copy.

    I gave out int. transfer belt and make photo, and make photo of transfer roller, but now I remember, I changed this spring: A6DR702701 in coveyance section: it could be the possibility of poor printing quality?
    After the side cover is closed, the conveyance mechanism put the transfer roller down. Which is the right position of transfer roller after closing side cover? Up or down?
    I make paper jam (open the side cover, when it printing) and the transfer roller was up.
    I make paper jam and put out itb. transfer belt and the picture at the ITB before reaching transfer roller was at poor quality. What do you think? The customer did not changed the drums (and he lie to me?)
    Attached Images Attached Images
    Attached Files Attached Files
    Last edited by spree; 01-20-2021 at 12:03 PM.

  2. #12
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    4,507
    Rep Power
    102

    Re: koinca minolta c3100p lines on copy.

    Except for the ding in the belt, both roller and belt looks ok. The picture with the image on the belt shows that the transfer is bad. Looking at that most of the image stays on the belt and does not get transferred.

    Make sure the HV makes proper contact. Also make sure the roller is pressing against the belt. The gears to lift the roller could be installed out of position.

    Sure those ellipses on the sample print should be there?
    Last edited by allan; 01-20-2021 at 11:41 PM.
    Whatever

  3. #13
    Senior Tech 100+ Posts
    Join Date
    Jun 2012
    Posts
    169
    Rep Power
    0

    Re: koinca minolta c3100p lines on copy.

    Yes elipses are in the picture printed from computer.

  4. #14
    Senior Tech 100+ Posts
    Join Date
    Jun 2012
    Posts
    169
    Rep Power
    0

    Re: koinca minolta c3100p lines on copy.

    Quote Originally Posted by allan View Post
    Except for the ding in the belt, both roller and belt looks ok. The picture with the image on the belt shows that the transfer is bad. Looking at that most of the image stays on the belt and does not get transferred.

    Make sure the HV makes proper contact. Also make sure the roller is pressing against the belt. The gears to lift the roller could be installed out of position.

    Sure those ellipses on the sample print should be there?

    You wrote: Looking at that most of the image stays on the belt and does not get transferred.
    I wrote: The picture at the transfer belt is BEFORE it reaches transfer roller! It is transfered right from drums!

  5. #15
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    4,507
    Rep Power
    102

    Re: koinca minolta c3100p lines on copy.

    Quote Originally Posted by spree View Post
    You wrote: Looking at that most of the image stays on the belt and does not get transferred.
    I wrote: The picture at the transfer belt is BEFORE it reaches transfer roller! It is transfered right from drums!
    Will have to disagree with you on that statement. It can't develop an entire image on the belt before transfer.
    The image you got there was on the top of the belt. The transfer belt cleaning blade will be next in line.

    Right from drums wrong from belt to paper.
    Last edited by allan; 01-21-2021 at 09:25 PM.
    Whatever

  6. #16
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    4,507
    Rep Power
    102

    Re: koinca minolta c3100p lines on copy.

    Quote Originally Posted by allan View Post
    Will have to disagree with you on that statement. It can't develop an entire image on the belt before transfer.
    The image you got there was on the top of the belt. The transfer belt cleaning blade will be next in line.

    Right from drums wrong from belt to paper.

    Ok wow reconsidering this. The image is on the bottom of the belt ain't it.
    Did not think you can stop a machine at the point. Well my bad again...

    Call me Mr Assumption...

    If it looks like the belt and it smells like the belt please change the belt.
    You did change all the drums. And you did clean the laser glass.

    If that is primary transfer then the transfer quality is bad.

    Guess i will take a break from posting stuff. Getting hammered.
    Whatever

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here