I gave out int. transfer belt and make photo, and make photo of transfer roller, but now I remember, I changed this spring: A6DR702701 in coveyance section: it could be the possibility of poor printing quality?
After the side cover is closed, the conveyance mechanism put the transfer roller down. Which is the right position of transfer roller after closing side cover? Up or down?
I make paper jam (open the side cover, when it printing) and the transfer roller was up.
I make paper jam and put out itb. transfer belt and the picture at the ITB before reaching transfer roller was at poor quality. What do you think? The customer did not changed the drums (and he lie to me?)
Bookmarks