Results 1 to 9 of 9
  1. #1
    Senior Tech 100+ Posts inutelkamo's Avatar
    Join Date
    Jul 2011
    Location
    somewhere esle
    Posts
    145
    Rep Power
    22

    Bizhub C650 Firmware

    Hi guys, any here still servicing bizhub c650?

    Do you have a latest firmware?
    or if anyone has a copy of the latest firmware i will appreciate it much.

    Thank you so much!

  2. #2
    Junior Member
    Join Date
    Jun 2021
    Location
    92154
    Posts
    5
    Rep Power
    0

    Re: Bizhub C650 Firmware

    i really really need the firmware for my printer bizhub c650, it came up with some issues and after i disconect the main board and reconect now indicate that is open indicated by O , i am not tecnitian or else i have been doing all by my self and checking alll the manuals, please anyone can help me to get this firmware please ASAP

  3. #3
    Service Manager 10,000+ Posts
    Bizhub C650 Firmware

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,309
    Rep Power
    379

    Re: Bizhub C650 Firmware

    Quote Originally Posted by ajimpresion View Post
    i really really need the firmware for my printer bizhub c650, it came up with some issues and after i disconect the main board and reconect now indicate that is open indicated by O , i am not tecnitian or else i have been doing all by my self and checking alll the manuals, please anyone can help me to get this firmware please ASAP
    Try contributing to CTN. Firmware is not meant for end-users.
    What problems are you having that makes you think you need it?
    Error code? Symptoms?


    Sent from my SM-G960U using Tapatalk
    Last edited by Phil B.; 1 Day Ago at 12:44 AM.

  4. #4
    Senior Tech 100+ Posts
    Bizhub C650 Firmware


    Join Date
    Feb 2011
    Location
    Las Vegas
    Posts
    193
    Rep Power
    24

    Re: Bizhub C650 Firmware

    not worth trying...You will probably need a compact flash card. As we know not all memory cards work. Save yourself a major headache . Don't do it!! Time to get a new machine

  5. #5
    Junior Member
    Join Date
    Jun 2021
    Location
    92154
    Posts
    5
    Rep Power
    0

    Re: Bizhub C650 Firmware

    Quote Originally Posted by Phil B. View Post
    Try contributing to CTN. Firmware is not meant for end-users.
    What problems are you having that makes you think you need it?
    Error code? Symptoms?


    Sent from my SM-G960U using Tapatalk
    as soon as i start up the printer , it give me the parts open by arrow is open , ensure that is properly closed,
    and got stuck there, also let me tell you that i desconect the PRCB board and i reconected and there is when i got this error
    and before that i couldnt print at all , all the print came out blank and gave me error P-21 and others P erros like 6-7 -8-9
    so after reading and checking a lot of coments and blogs , after all that i came with the firmware solution to rectify what ever
    i did , i am not tech but i can not afford one so i did my self i hope i did the right steps but i beleived i did
    and the trays will not light on or move o else also give me missfeed problem and i can not start up

  6. #6
    Junior Member
    Join Date
    Jun 2021
    Location
    92154
    Posts
    5
    Rep Power
    0

    Re: Bizhub C650 Firmware

    Quote Originally Posted by Reed View Post
    not worth trying...You will probably need a compact flash card. As we know not all memory cards work. Save yourself a major headache . Don't do it!! Time to get a new machine
    i wish i can affort one but i can not affort it , i bearly have this one it was working just fine it just stop printer from one copy o other , i am in tijuana mexico
    i really really need to save my printer

  7. #7
    Service Manager 500+ Posts femaster's Avatar
    Join Date
    May 2011
    Location
    A Small City in MI
    Posts
    551
    Rep Power
    34

    Re: Bizhub C650 Firmware

    Quote Originally Posted by ajimpresion View Post
    as soon as i start up the printer , it give me the parts open by arrow is open , ensure that is properly closed,
    and got stuck there, also let me tell you that i desconect the PRCB board and i reconected and there is when i got this error...
    Just going to throw this out here. The odds of firmware fixing your current issue, or even the issue you had before you went blindly digging around, is slim to none.

    So, let's start with some troubleshooting steps.

    1. I'm going to assume that you actually have all the doors and access covers closed, fully? That is what that message means. It thinks something is open and wants you to close it. Close everything. Is the message gone?
      1. YES - You're done, create a NEW post to deal with your original problem.
      2. NO - Continue on.

    2. Go back over all the connections you removed earlier and make sure each one is fully inserted and that you didn't forget any of the wires when you plugged them back in. Is the message gone?
      1. YES - You're done, create a NEW post to deal with your original problem.
      2. NO - Continue on.

    3. Remove the wire harnesses again, one at a time, and look very closely at the pins in every socket on the board that you messed with. The plugs can be a real pain to get out sometimes, and if not pulled straight out, can result in bent pins in the socket. If these aren't straightened out before you reinsert the harness into the socket, the pin will get bent over completely and you will end up with strange problems like you are experiencing now. Bent pin(s)?
      1. YES - Straighten all bent pins, CAREFULLY, you don't want to break one off! Make sure you check EVERY socket before testing again! Is the message gone?
        1. YES - You're done, create a NEW post to deal with your original problem.

      2. NO - Post any results or findings and wait for further instructs by someone.



    Good luck, sounds like you are going to need it...
    Ricoh Service Tech for 7 year. Currently a Konica Minolta Service Tech for the last 7 years.
    My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

  8. #8
    Junior Member
    Join Date
    Jun 2021
    Location
    92154
    Posts
    5
    Rep Power
    0

    Re: Bizhub C650 Firmware

    Quote Originally Posted by femaster View Post
    Just going to throw this out here. The odds of firmware fixing your current issue, or even the issue you had before you went blindly digging around, is slim to none.

    So, let's start with some troubleshooting steps.

    1. I'm going to assume that you actually have all the doors and access covers closed, fully? That is what that message means. It thinks something is open and wants you to close it. Close everything. Is the message gone?
      1. YES - You're done, create a NEW post to deal with your original problem.
      2. NO - Continue on.

    2. Go back over all the connections you removed earlier and make sure each one is fully inserted and that you didn't forget any of the wires when you plugged them back in. Is the message gone?
      1. YES - You're done, create a NEW post to deal with your original problem.
      2. NO - Continue on.

    3. Remove the wire harnesses again, one at a time, and look very closely at the pins in every socket on the board that you messed with. The plugs can be a real pain to get out sometimes, and if not pulled straight out, can result in bent pins in the socket. If these aren't straightened out before you reinsert the harness into the socket, the pin will get bent over completely and you will end up with strange problems like you are experiencing now. Bent pin(s)?
      1. YES - Straighten all bent pins, CAREFULLY, you don't want to break one off! Make sure you check EVERY socket before testing again! Is the message gone?
        1. YES - You're done, create a NEW post to deal with your original problem.

      2. NO - Post any results or findings and wait for further instructs by someone.



    Good luck, sounds like you are going to need it...
    you are great man thank you for guide me , i will advise the result after i remove the harnesses , i apreciate

  9. #9
    Junior Member
    Join Date
    Jun 2021
    Location
    92154
    Posts
    5
    Rep Power
    0

    Re: Bizhub C650 Firmware

    Quote Originally Posted by ajimpresion View Post
    you are great man thank you for guide me , i will advise the result after i remove the harnesses , i apreciate

    is fix , now i got again the P-21 AND P-5

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here