just for clarification, the actuator is on the feed assy not the tray.
just for clarification, the actuator is on the feed assy not the tray.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
IMG_3055.jpgIMG_3053.jpg here and here. thats the spot. there is a lever at the machine that detects it. i usually apply lubricant on the trays and problem solved.
of note: I had this problem but it turns out, I had too much paper in tray and it would not accept with all the paper. I reduced the paper amount and voila...the error message is now gone...
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks