Konica C284e/C364e firmware File

[Synthohol]

likely a scanner error.
shut off with main power behind door, hold down panel reset and power back on. close door right away while still holding panel reset until you see a black dot top right of screen. release button.
when you see trouble reset on screen touch it, should say OK.
turn it off, count to 10 and turn back on.
if it was a serious error tell us the code that pops up.
if error was just silly, you should be able to copy.

as far as the zero meter, someone botched a procedure.
anyway, let us know.

i just said all this...

[mhmds102466]

Hi all

Can anyone send me the firmware and movie data file for the C284e/C364e?

Thanks in advance!

How are you? I have a Bizhub c284eShow on screen
serial number must be entered contact your service representaive

[Ari007]

How are you? I have a Bizhub c284eShow on screen
serial number must be entered contact your service representaive

Press Reset and turn the power switch on..
Login to service menu...
Input serial numbers..

And exit ... Done... Calibrate the machine if required..

[mhmds102466]

Press Reset and turn the power switch on..
Login to service menu...
Input serial numbers..

And exit ... Done... Calibrate the machine if required..

After entering the Login to service menu where I find the Input serial numbers list.

[Ari007]

After entering the Login to service menu where I find the Input serial numbers list.

Service Menu> System 1> Serial Number

[mhmds102466]

Press Reset and turn the power switch on..
Login to service menu...
Input serial numbers..

And exit ... Done... Calibrate the machine if required..

I am sorry for the inconvenience, but I am very upset by the machine I did not say it with the letter and I got it wrong again Code number C-D010 and before it the god worked but all the colors are not visible and the appearance of lines when shooting in the paper and all sizes paper is not equal I want the Calibrate the machine if required

[mhmds102466]

Service Menu> System 1> Serial Number

After entering the serial number, the message no animation guide available

[copier tech]

After entering the serial number, the message no animation guide available

You need to reinstall the animation firmware.

[Ari007]

After entering the serial number, the message no animation guide available

Go to Service Menu>System 2>HDD> Click Not Installed..

Animation Guide error will not disturb you again ... (This is a temporary solution)

Install the animation Guide file once you find the movie data file.. (turn hdd on first from System 2> HDD > Installed)

If you turn off HDD, multi page pdf scans having pages more than 10 will not transmit to your PC. Machine might hang. Normal printing operation will work fine.

[mhmds102466]

You need to reinstall the animation firmware.

Where do I find animation firmware