Thanks: 
Likes: Originally Posted by Synthohol
Whats the problem with my avatar name? make u at problem? i have 33 yo dude... and i dont know whats the problem with that.. but anyway.
want pay to page or for u?
Dislikes: 0
Whats the problem with my avatar name? make u at problem? i have 33 yo dude... and i dont know whats the problem with that.. but anyway.
want pay to page or for u?
not for me, for CTN.
https://www.copytechnet.com/forums/v....php?do=donate
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
What is your exact issue, you can't print? do you can any message on the screen? have you tried a new driver?
Unlikely firmware will fix this issue sounds like you have user authentication turned on?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
initialize / clear all data within service mode.enable HDD, logical format, configure TCP / IP.
Likely user restriction enabled.
i was try with that. but ive a little problem.. i cant log on service mode... this machine was change the password and i was try to bypass and nothing work.
The problem with the print this send to the machine, this turn on the light and dont print.. when i check on list job say loggin error.
and this problem fix with reinstalling firmware
fuck1ng is pretty poor name...
UNLESS you are talking about your English.
33? still a kid compared to most of us here.
Synth was talking about being a CONTRIBUTOR to CTN.... to obtain the files you request.
***HINT*** drop the attitude you will not get anywhere with it.
well anyway.. sorry for all..
ill contribute the monday. dont worry and thanks for your help.
[QUOTE = cccc213; 755173] 아니요, 저는이 포럼의 최종 사용자이자 기고자입니다. 오류 코드 C-FA14 => HDD 변경 후 C-D010 오류. 논리 형식이 불가능합니다.
최신 펌웨어를 사용 해보고 C284e의 동영상 데이터를 복사합니다. 누구든지 C284e의 펌웨어 및 영화 데이터 파일과 함께 오후를 보낼 수 있습니까? 감사합니다 [/ QUOTE]
Hi?
Please follow the instructions below.
1. Enter service mode
2. Select System 1
3. Select Initialization-> Clear All Data-> Start->
Power off / on message is displayed when off / on.
4. Enter service mode
5. Select System2-> Select HDD-> Select No Mount-> OK->
Power off / on message is displayed when off / on.
6. Enter service mode
7. Select main unit-> SSD format-> Logical format-> Start->
Power off / on message is displayed when off / on.
8. Enter service mode
9. Select System 2-> HDD Selection-> Mounting-> OK->
Power off / on message is displayed when off / on.
10 Enter service mode
11. Select Main Unit-> HDD Format-> Logical Format-> Start->
Power off / on message is displayed when off / on.
12. Enter service mode
13. Select System 2-> Select Next Page-> Select Install Data->
Insert USB with video data on the right side of the OP panel->
Select video-> register-> blue LED on start button->
Close the service mode window.
Dear All,
I hv Dl the firmwares for updating C364e, but I put my USB drive to back service port and Power ON the machine,
which did't load to the update page, it just reboot the machine only. I hv try two firmwares:
1. A5C10Y0-F000-G20-A9 and
2. A5C10Y0-F000-G20-K9
Could somebody tell me, is there anythine worng here? thanks a lot.
Larry
use a 4 gig or smaller flash drive formatted fat32
on the 4 series you put all the folder contents in the root.
get g20-m1 firmware.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Reply With Quote
Bookmarks