In the manual service I read that Update PRCB Firmware.
does anybody know the name of Firmware ?
thanks
In the manual service I read that Update PRCB Firmware.
does anybody know the name of Firmware ?
thanks
Basically you just load the mass production firmware & this will update the Printer Control Board firmware, this is usually needed to be done if you have replaced the PRCB.
Unless you have a issue there are special firmware versions available that address specific faults etc.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks