Wrong toner indicator bizhub 227

[arahael]

hi. all i know in xx4 series is that you can reset all toner indicator. with engine dipsw 1

[cristachecri]

hi. all i know in xx4 series is that you can reset all toner indicator. with engine dipsw 1

I want to reset the toner indicator because I supply new toner bottles with the equipment and when not completely emptied. In this case the toner indicator remains at a low level although the toner is new.

[cristachecri]

hi. all i know in xx4 series is that you can reset all toner indicator. with engine dipsw 1

thanks for the answer but I have studied all the technical documentation of the xx4 series and have not found dipsw 1. If you have information on how to proceed this toner reset indicator please tell me

[copier tech]

Hi,


I had read some posts here in the forum about the toner indicator. From what I understand, they do not have a sensor but measure the number of toner rotations to define the amount left.


I have a customer with a bizhub C227, monitored with CSRC. For about 3 months the black toner is stuck at 2% while the color level changes regularly.


I honestly do not know what the customer has done with the toner. They told me that they forgot to order it once and they kept shaking it to keep the printer going.


Always 3 months ago, after putting the new toner to me in the CSRC indicates 2%. For me it is not a big deal but I wanted to know if there is a way to remove this freezing.


See you soon

Tell the customer to ignore those tiny gauges they are only there as a guide.

The toner bottles do not have a chip, so if when the machine shows toner empty, the customer takes the bottle out shakes it & fits it back the machine will rest the toner gauge to full!

[gere1]

I have this for several teams
Activate engine fw
Swith software
59
01


stop 0 c
Engine fw dipsw
C368 and C360i
31 yellow
32 magenta
33 cyan
34 black
In c364e equipment
one
Reset all toners




go out and turn off equipment
translated with google
I hope it serves something
try in seven or one configuration or another
and you already count

[metal]

Hi,
what is the default value for these switches.
I have the same problem on bizhub 227 and 257i models.
thanks.