Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22
  1. #11
    Senior Tech 100+ Posts Brett GS's Avatar
    Join Date
    Jun 2013
    Location
    N/A
    Posts
    154
    Rep Power
    23

    Re: Some MFPs stop communicating with the CSRC

    Quote Originally Posted by tech51 View Post
    Http is flaky to say the least. We tend to get a more stable communication using email2.
    Email isnt to stable our side,have to visit machines all the time that stop communicating.

  2. #12
    Service Manager 1,000+ Posts
    Some MFPs stop communicating with the CSRC


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,894
    Rep Power
    69

    Re: Some MFPs stop communicating with the CSRC

    Quote Originally Posted by Choclit007 View Post
    I have had a few devices stop reporting.
    I would delete/recreate them & RAM clear the machines before reconfiguring them only to get 3002 errors.

    I tried using the ConnectionChecker-v1.2.0 software
    i dont know if i trust that

    KM discontinued using port 80 ages ago when they forced SSL port 443 but ive run that software on port 80 and it says its ok.

    i think best thing to do is just ram clear and reconfig from scratch

  3. #13
    Step aside, noob 1,000+ Posts EarthKmTech's Avatar
    Join Date
    May 2009
    Location
    Gigety
    Posts
    2,141
    Rep Power
    75

    Re: Some MFPs stop communicating with the CSRC

    Quote Originally Posted by rrrohan View Post
    i dont know if i trust that

    KM discontinued using port 80 ages ago when they forced SSL port 443 but ive run that software on port 80 and it says its ok.

    i think best thing to do is just ram clear and reconfig from scratch
    2 different servers, the one accepting connections on port 80 was at capacity, but still works. Older models don't work with modern SSL so its not going anywhere yet.

  4. #14
    Service Manager 5,000+ Posts
    Some MFPs stop communicating with the CSRC

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Some MFPs stop communicating with the CSRC

    Quote Originally Posted by and View Post
    If the firmware with function version 4.2 is applied, the setting of TLS1.0/SSL3.0 is turned OFF. Check and reactive this.
    I am facing this same issue it seems that after upping the function version these machines fail to connect.

    Where do I need to turn back on these TLS setting please?
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  5. #15
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,103
    Rep Power
    346

    Re: Some MFPs stop communicating with the CSRC

    Quote Originally Posted by copier tech View Post
    I am facing this same issue it seems that after upping the function version these machines fail to connect.

    Where do I need to turn back on these TLS setting please?
    On bizhub C250i

    Clipboard01.jpg
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  6. #16
    Service Manager 1,000+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    1,421
    Rep Power
    39

    Re: Some MFPs stop communicating with the CSRC

    Quote Originally Posted by copier tech View Post
    I am facing this same issue it seems that after upping the function version these machines fail to connect.

    Where do I need to turn back on these TLS setting please?

    Yes, you have to activate it.
    It also disables WebDAV

  7. #17
    Service Manager 5,000+ Posts
    Some MFPs stop communicating with the CSRC

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Some MFPs stop communicating with the CSRC

    Quote Originally Posted by tsbservice View Post
    On bizhub C250i

    Clipboard01.jpg

    Most of mine dropping off are 4e series.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  8. #18
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,103
    Rep Power
    346

    Re: Some MFPs stop communicating with the CSRC

    Quote Originally Posted by copier tech View Post

    Most of mine dropping off are 4e series.
    Doesn't matter. Still under [Security] - [PKI Settings] - [SSL Setting]

    Clipboard01.jpg
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  9. #19
    Service Manager 1,000+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    1,421
    Rep Power
    39

    Re: Some MFPs stop communicating with the CSRC

    Quote Originally Posted by copier tech View Post

    Most of mine dropping off are 4e series.
    The absurd thing is that in some cases it works for me even with those two flags disabled and then stop working at any moment.
    So do it! Disable those flags like my colleague tbservice says!

  10. #20
    Senior Tech 100+ Posts
    Some MFPs stop communicating with the CSRC

    copyrooks's Avatar
    Join Date
    Oct 2013
    Posts
    200
    Rep Power
    30

    Re: Some MFPs stop communicating with the CSRC

    I have the same issue randomly with different series of machines. They'll report for a long time then all of a sudden stop. I hate calling vcare support as they just blame the customer's network and pretty much refuse to assist after giving their usual instructions. I end up asking my admin to re register on the vcare program, i get lucky sometimes but some accounts i end up physically getting the meter or calling and asking them to email if the customer is nice enough.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here