Page 3 of 3 FirstFirst 123
Results 21 to 26 of 26
  1. #21
    Senior Tech 250+ Posts
    Join Date
    Mar 2009
    Posts
    270
    Rep Power
    27

    Re: BizHub C554 paper jam at fuser exit

    Quote Originally Posted by EarthKmTech View Post
    Check the gray roller in the unit at the top of the side door isnt tight to turn - it destroys the clutch that drives it (inside the fusing drive unit)

    You may also notice iron oxide accumulation dropping out of this clutch, visible on the fusing drive disengagement finger at the rear side of the second transfer door.

    The bushings are a regular point of lubrication on all machines of this engine style, along with the registration bushings.

    Fortunately the clutch is easy to change in the 554 without having to remove the fusing drive unit.

    Paper will be accordion jamming at fuser exit when this is the issue.
    What lube are you using on the bearings? Haven't really found one that lasts? My go to is a dry ptfe. I can't find anything that will take the heat of the fusing unit and the paper dust at the registration.

  2. #22
    CopyTech,MIKE 100+ Posts copytech,mike's Avatar
    Join Date
    Jun 2014
    Location
    Silver Spring MD
    Posts
    128
    Rep Power
    0

    Re: BizHub C554 paper jam at fuser exit

    Quote Originally Posted by printprocc View Post
    Thank you 3ktlc! I went thru that entire section and made sure everything was moving easily and properly...I am further investigating cl8! I have a feeling that is where my troubles are but have another machine im working on that is desperately needed.

    Sent from my SM-G955U using Tapatalk
    I did all that and it still jams.

  3. #23
    KonicaMinolta Senior Tech 500+ Posts srvctec's Avatar
    Join Date
    Oct 2009
    Location
    Central Kansas
    Posts
    597
    Rep Power
    49

    Re: BizHub C554 paper jam at fuser exit

    Quote Originally Posted by tmmdmmm View Post
    Can I steal that PDF from you? Had a CL8 in my car for a while and looks like I'll need it on an upcoming call. Its a 554 but figure it'll be practically the same. Expecting a ton of rust
    Check your PMs.
    Started in the copier service business in the fall of 1988 and have worked at the same company since then, now the senior tech, since 2004.

  4. #24
    Technician
    Join Date
    Jun 2015
    Posts
    14
    Rep Power
    13

    Re: BizHub C554 paper jam at fuser exit

    Quote Originally Posted by srvctec View Post
    Check your PMs.
    Hello I am also experiencing the same problem on a C554E almost certainly it is the cl8 full of rust. You can pass the PDF in private thank you very much

  5. #25
    KonicaMinolta Senior Tech 500+ Posts srvctec's Avatar
    Join Date
    Oct 2009
    Location
    Central Kansas
    Posts
    597
    Rep Power
    49

    Re: BizHub C554 paper jam at fuser exit

    Quote Originally Posted by ferro10 View Post
    Hello I am also experiencing the same problem on a C554E almost certainly it is the cl8 full of rust. You can pass the PDF in private thank you very much
    PM sent.
    Started in the copier service business in the fall of 1988 and have worked at the same company since then, now the senior tech, since 2004.

  6. #26
    Technician
    Join Date
    Jun 2015
    Posts
    14
    Rep Power
    13

    Re: BizHub C554 paper jam at fuser exit

    Quote Originally Posted by srvctec View Post
    Check your PMs.
    thank you

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here