Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts afterhours's Avatar
    Join Date
    Mar 2017
    Location
    Tampa, Florida
    Posts
    151
    Rep Power
    16

    Bizhub 223 with C-C163

    Does anyone know what might be causing this problem? I replaced the mfp from one machine to another due to a different problem. Now it codes C-C163.

    I tried firmware but it doent give the mfp as an option too update.

    Any ideas?

  2. #2
    Certified Konica Expert 2,500+ Posts
    Bizhub 223 with C-C163

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,988
    Rep Power
    217

    Re: Bizhub 223 with C-C163

    because the boards marry their respective hosts.
    you may get lucky and check/change the machine type when booting from a FW stick, may be the correct machine and type to the serial# of the host.
    if the machine and type are correct, try moving over the PRCB it was initially married to.
    which SSD card did you install on this one?



    3.15.7 CC163
    (1) Contents
    Trouble type ROM contents error (PRT)
    Trouble code CC163
    Rank C
    Detection timing The wrong model of firmware is detected in the engine during the initial connection to the engine is be
    checked.
    Trouble isolation -
    Relevant electrical parts Printer control board (PRCB)
    (2) Procedure
    Step Action Control signal Location of electrical co
    1 Unplug and plug the power cord from/into the outlet, turn the
    main power switch OFF, wait 10 seconds or more, and turn
    it ON.
    - -
    2 Rewrite the firmware. - -
    3 Change PRCB - -
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  3. #3
    Aging Tech 10,000+ Posts
    Bizhub 223 with C-C163

    copier addict's Avatar
    Join Date
    Jul 2013
    Location
    Diamond
    Posts
    12,002
    Rep Power
    325

    Re: Bizhub 223 with C-C163

    The MFP boards are different between BH223/283 and BH363/423. Also, you have to take the NVRam from the original MFP and install it on the replacement MFP

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here