Quote Originally Posted by Bwp View Post
I’m having same issue as OP on C8000. Machine immediately goes to 5106. What was your final solution?
I got it figured out for those who are having the same problem. The fuse ICP16 on the Conveyance board was blown... very hard to find. It is behind CN301 towards the middle front of the board. Label for it is about an inch to the left behind wire connector in the B cluster. Leading up to the problem, machine had C2223 which indicated the M40 2nd transfer motor. Replaced the motor and about an hour later went to c5106.

ICP16sm.jpg