Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Junior Member asemany's Avatar
    Join Date
    Aug 2013
    Location
    mashhad
    Posts
    6
    Rep Power
    0

    Konica Minolta C654 Fuser Unit and Transfer Belt Reset

    Hi.

    How to reset Fuser Unit and Transfer Belt life in Konica Minolta c654 ?


    Thanks a lot.

  2. #2
    Service Manager 2,500+ Posts
    Konica Minolta C654 Fuser Unit and Transfer Belt Reset


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    3,860
    Rep Power
    133

    Re: Konica Minolta C654 Fuser Unit and Transfer Belt Reset

    They are reset in the service mode AFTER REPLACING units. Call a qualified technician.

    I'm sure someone here will want to be big man on campus and tell you how to do it. Not realizing what happens when a fellow tech in a few months goes on service call and sees that belt isn't showing much use. Now you screwed them because they go searching somewhere else for a print quality issue. A good tech will eventually figure it out but meanwhile you just wasted a lot of their time.

    Of course much of this reset info can be found on google search.

  3. #3
    Certified Konica Expert 2,500+ Posts
    Konica Minolta C654 Fuser Unit and Transfer Belt Reset

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,988
    Rep Power
    217

    Re: Konica Minolta C654 Fuser Unit and Transfer Belt Reset

    Once the items are actually replaced go to service mode, counters select new release then open the big front door, button turns blue then hit start for each..
    If you reset the xfer belt without replacing it you will have image problems supreme.
    Just for reference the xfer belt is voltage\wear significant.
    If you reset the belt without actually replacing it you are asking for poor quality.
    I'm only stating this because I've seen "cheaters" screw themselves a dozen times.
    Last edited by Synthohol; 02-12-2019 at 10:36 PM.
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  4. #4
    Service Manager 5,000+ Posts
    Konica Minolta C654 Fuser Unit and Transfer Belt Reset

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,560
    Rep Power
    182

    Re: Konica Minolta C654 Fuser Unit and Transfer Belt Reset

    Quote Originally Posted by asemany View Post
    Hi.

    How to reset Fuser Unit and Transfer Belt life in Konica Minolta c654 ?


    Thanks a lot.
    ONLY reset the counters if you replace the units.

    You can however simply turn off the "replace xxxx" warnings in CE mode this is a better option as it does not clear the unit life.

    You may need a firmware update if your C654 is on factory fw.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  5. #5
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,149
    Rep Power
    346

    Re: Konica Minolta C654 Fuser Unit and Transfer Belt Reset

    Quote Originally Posted by asemany View Post
    Hi.

    How to reset Fuser Unit and Transfer Belt life in Konica Minolta c654 ?


    Thanks a lot.
    For what reason do you need that?
    This is big/fast color machine. As good as KM are at office color, they still need some parts to be changed.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  6. #6
    Service Manager 2,500+ Posts
    Konica Minolta C654 Fuser Unit and Transfer Belt Reset


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    3,860
    Rep Power
    133

    Re: Konica Minolta C654 Fuser Unit and Transfer Belt Reset

    My thoughts exactly tsb. The life of fuser is rated at 1.2 million and Transfer belt over 1/2 million. Even with that people still want to reset the counters. Good advice from other poster just turn off message (not sure you can do it once message shows).

  7. #7
    Service Manager 1,000+ Posts
    Konica Minolta C654 Fuser Unit and Transfer Belt Reset


    Join Date
    Mar 2012
    Posts
    1,220
    Rep Power
    50

    Re: Konica Minolta C654 Fuser Unit and Transfer Belt Reset

    Quote Originally Posted by copier tech View Post
    ONLY reset the counters if you replace the units.

    You can however simply turn off the "replace xxxx" warnings in CE mode this is a better option as it does not clear the unit life.

    You may need a firmware update if your C654 is on factory fw.
    On the C654 you cannot simply turn off the "replace xxxx" warnings in CE mode.
    You CAN set "IU Life Stop Setting" to No Stop.
    Perhaps this is possible elsewhere that I am no aware of, but not in CE mode...

    Depending on the situation, environment and PQ requirements those transfer belts and fusers will easily go past 1.5x life expectancy with excellent PQ (which requires the reset). Why would you want to do this is self-evident. If the techs use their Machine History booklets responsibly there wouldn't be confusion either (unless they cannot write legibly or someone is illiterate).

  8. #8
    Service Manager 5,000+ Posts
    Konica Minolta C654 Fuser Unit and Transfer Belt Reset

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,560
    Rep Power
    182

    Re: Konica Minolta C654 Fuser Unit and Transfer Belt Reset

    Quote Originally Posted by Synaux View Post
    On the C654 you cannot simply turn off the "replace xxxx" warnings in CE mode.
    You CAN set "IU Life Stop Setting" to No Stop.
    Perhaps this is possible elsewhere that I am no aware of, but not in CE mode...

    Depending on the situation, environment and PQ requirements those transfer belts and fusers will easily go past 1.5x life expectancy with excellent PQ (which requires the reset). Why would you want to do this is self-evident. If the techs use their Machine History booklets responsibly there wouldn't be confusion either (unless they cannot write legibly or someone is illiterate).
    Yes there is an additinal setting use system 2 sw51 & 55 as per bulletin.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here