Can someone help me find a firmware for this machine, I got error C-C101 after replacing the PRCB. The new one has A1DU rev.00 written on one of the chips and A1DUH030 C0022851 number printed on the plate. Thank you.
Thanks: 0
Likes: 0
Dislikes: 0
Can someone help me find a firmware for this machine, I got error C-C101 after replacing the PRCB. The new one has A1DU rev.00 written on one of the chips and A1DUH030 C0022851 number printed on the plate. Thank you.
Last edited by kandod; 02-19-2019 at 02:32 PM.
did you try to copy files BEFORE bd swap?Originally Posted by kandod
did you follow SM procedures?
Didn't know that was possible. How can I copy them? Followed procedures in service manual error C-C101 and after replacing the ICP23 fusable link the old PRCB starts but then C-5002 comes and the cause is PRCB does not give proper start signals to DCPS2/.
According to the manual G00-xxxx type of firmware is needed for A1DUH030 type of board. The old one is A1DUH830.
Firmware version before was: P Control C -> A1DU0Y0-00C1-GPY-40
[QUOTE = kandod; 729882] A versão do firmware anterior era: P Controle C -> A1DU0Y0-00C1-GPY-40 [/ QUOTE]
Você precisa de uma versão de firmware?
Turn on the machine directly in service mode and check the firmware of the boards.
Reply With Quote
Bookmarks