Results 1 to 4 of 4

Thread: IC 601

  1. #1
    Senior Tech 100+ Posts selmila's Avatar
    Join Date
    Aug 2012
    Posts
    132
    Rep Power
    25

    IC 601

    hi.

    SC CODE 00 - 012

    controller dosen't print! any suggestiong to recover the error.

  2. #2
    Certified Konica Expert 2,500+ Posts
    IC 601

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,943
    Rep Power
    216

    Re: IC 601

    can you web into it? check bit sw 18-6 (all switch 18s should be 0)
    see if that works first.
    A213R90300 is the HDD for it.
    you can try a new hdd assy and or just system software.
    found this...
    5.2.8 00-012Code00-012ClassificationHDD abnormalityCauseSerial number of HDD/2 (HDD2) does not match.HDD2 is replaced.Measures to take when alert occursIC stops immediately.Estimated abnormal parts• HDD/2 (HDD2)CorrectionTurn OFF/ON the power switch of IC.Note• The message "Please turn on power again" is displayed on the touch panel.Solution1.Turn OFF the power switch of IC and reboot it after 10 seconds.2.Check that the connected HDD/2 (HDD2) is what should be connected or a new HDD, and replace it if any abnormality.3.If it is what should be connected or a new one, format it by the IC HDD format ''ALL''.Faulty part isolation DIPSWControl while detached.
    see bulletin.



    Attached Files Attached Files
    Last edited by Synthohol; 04-02-2019 at 01:48 PM.
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  3. #3
    Senior Tech 100+ Posts selmila's Avatar
    Join Date
    Aug 2012
    Posts
    132
    Rep Power
    25

    Re: IC 601

    [QUOTE=Synthohol;744396]can you web into it? check bit sw 18-6 (all switch 18s should be 0)
    see if that works first.
    A213R90300 is the HDD for it.
    you can try a new hdd assy and or just system software.
    found this...
    5.2.8 00-012Code00-012ClassificationHDD abnormalityCauseSerial number of HDD/2 (HDD2) does not match.HDD2 is replaced.Measures to take when alert occursIC stops immediately.Estimated abnormal parts• HDD/2 (HDD2)CorrectionTurn OFF/ON the power switch of IC.Note• The message "Please turn on power again" is displayed on the touch panel.Solution1.Turn OFF the power switch of IC and reboot it after 10 seconds.2.Check that the connected HDD/2 (HDD2) is what should be connected or a new HDD, and replace it if any abnormality.3.If it is what should be connected or a new one, format it by the IC HDD format ''ALL''.Faulty part isolation DIPSWControl while detached.
    see bulletin.


    Thank you very much for the reply and the bulletin was very much helpfull to me. I willl check for the HDD part and replace.could also please share me the service manual/system software because i am new with print centro IC 601.
    thank you.

  4. #4
    Certified Konica Expert 2,500+ Posts
    IC 601

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,943
    Rep Power
    216

    Re: IC 601

    hey not to sound like a d1ck, but i share files with ˘ontributor$ only to help keep this site alive and maybe one day get rid of all the ads and elements.
    make sure that dip sw is set to 0.
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here