C360i

**tsbservice** · 09-19-2019

Originally Posted by B0265

Did you find out how to get rid of the beeps?

I did a little research and there are just so many sounds on this model and all are defaulted to ON.
Accessibility
I guess one of my first best practices on this will be to shut down ALL f...... beeps.

**B0265** · 09-20-2019

Originally Posted by korthr5

Hello

Check this TABT1900745EN and see if this is the symptom.

Thanks for the information but the C300i in our office have fw ver G00-45.

**korthr5** · 09-20-2019

Originally Posted by B0265

Thanks for the information but the C300i in our office have fw ver G00-45.

But the symptom is the same ?

**B0265** · 09-20-2019

I'm still trying to find out exatly when/why the MFP beeps.
Update:
It seems to make 2 beeps every minute in ready mode.

**jwai** · 09-21-2019

On previous models we can get the test print as below steps:

utility->user setting->printer setting->print report->demo page

However the i series can't find it.......

How about the procedure?

**copier tech** · 09-21-2019

Originally Posted by emujo2

This is so new, I haven't even seen one yet..

What a helpful reply this was!

**Bix** · 09-23-2019

Originally Posted by jwai

On previous models we can get the test print as below steps:

utility->user setting->printer setting->print report->demo page

However the i series can't find it.......

How about the procedure?

Utilities> Utilities> Information> Print information

I think it's time to create a topic for each question. In this way it will be easier to find an answer for those who will have the same problem in the future.

**B0265** · 09-23-2019

Originally Posted by korthr5

But the symptom is the same ?

Yes but the work around to turn off the "Completed Preparation Sound" seems to help.

**crannon** · 09-23-2019

Originally Posted by mascan42

Has anybody found a way to change the copy defaults in the new style menus? I can only get it to stick in the classic style.

I'm looking for this solution as well. Would like to default color to black. For now I just made classic menu the default but would still like to figure this out in case customers accidently enter basic mode and try to copy.

**Bix** · 09-23-2019

Originally Posted by crannon

I'm looking for this solution as well. Would like to default color to black. For now I just made classic menu the default but would still like to figure this out in case customers accidently enter basic mode and try to copy.

Create a new topic about it, being a trending topic.

You will get the answer and many others like you in this condition.

Thanks.