Bizhub 754e-654e

[Nisar235]

nvrm reset tool plz

[Synthohol]

AC24BS-Y_24oz_Claw-Hammer-1100x562.jpg

[copier tech]

nvrm reset tool plz

Hi,

We can supply you with this firmware file(s) should you still need it.

Feel free to drop us an email enquiry.


Kind Regards.

www.copierfirmware.co.uk

[tsbservice]

AC24BS-Y_24oz_Claw-Hammer-1100x562.jpg

Looks better than red card and in some cases actually may even help

[copyman]

It would be nice that people asking for F/W make a small donation to this site.

$5 or $10 is well worth all the advice given on this forum as well as manuals, firmware, etc

[copier tech]

It would be nice that people asking for F/W make a small donation to this site.

$5 or $10 is well worth all the advice given on this forum as well as manuals, firmware, etc

Exactly 👍🏻

[blazebusiness]

nvrm reset tool plz

If you want this tool because you can't access service mode with the CE password, -----The NV ram reset tool is for the C654 series------not the C654e series. To restore service mode access on the E series you need to generate a key. See below:

Related Products:bizhub 224e,bizhub 284e,bizhub 364e,bizhub 454e,bizhub 554e,bizhub 654e,bizhub
754e,bizhub C224e,bizhub C284e,bizhub C364e,bizhub C454e,bizhub C554e,bizhub C654e,bizhub C754e



Reference
WARNING: DO NOT use the Reset Tool on the “4e” Series. Instead, use the following reset procedure.
1. Press the [Menu] key.
2. Touch [Counter].
3. Touch the following keys in this order; Stop  0  0  Stop  0  1.
4. Touch the following keys in this order; Stop  Clear.

5. Three items are shown below.
Printer Serial Number
MAC address
CE Password Reset Request Code.

6. Access LMS (Konica License Management System) for Administrator using a PC connected to the Internet.
8. Click Issue Reset Code.
9. Enter Printer Serial Number, MAC address and CE Password Reset Request Code.
10. Click Issue.
12. LMS issues CE Password Reset Code.
15. Enter CE Password Reset Code on the copier screen
16. Service mode password is now back to the default.

[Synthohol]

if the OP had access to KM or LMS he would not ask for the file here.

[blazebusiness]

if the OP had access to KM or LMS he would not ask for the file here.

True, you are right. I just didn't want him to purchase the nv ram reset tool for the non-e series from somebody and mistakenly think he could fix a CE password issue on the E series with that tool.

[jotunn]

@blazebusiness
@Synthohol

I have a question about your LMS access level - have you got an access to "issue reset code" option as a dealers/service technician?
Here in EU, we've got access only iOption related buttons.

I saw a document for NA, about ressetting CE password which blazebusiness is relating to, so I'm curious.

--
Regards