Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: SD-506

  1. #1
    Field Supervisor 500+ Posts
    SD-506


    Join Date
    Dec 2008
    Location
    Baltimore, Maryland
    Posts
    718
    Rep Power
    29

    SD-506

    My old beater C6501 needed a new pressing plate, ordered part number 15AN52822F (Pressing plate) and its not the same, much different.... has a pin on it... looks like all the parts books... is there a bulletin on how to update? retrofit?

    put the old plate back in and reset, good for now, but wont hold up - been around this rodeo before...

  2. #2
    Service Manager 1,000+ Posts
    SD-506

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,147
    Rep Power
    44

    Re: SD-506

    heres the parts, the pin seems to be attached.
    do you have a pic of yours?
    hey, i have an old style svc manual, ck your PMs, i just cannot picture it on the machine so there are lots of pics of all parts of it.
    what page is the part in question seen if any.
    let me know. there are lots of part bulletins, just want to narrow it down.
    Attached Files Attached Files
    Last edited by Synthohol; 4 Weeks Ago at 04:01 AM.

  3. #3
    Field Supervisor 500+ Posts
    SD-506


    Join Date
    Dec 2008
    Location
    Baltimore, Maryland
    Posts
    718
    Rep Power
    29

    Re: SD-506

    The PDF you sent me has the same "trimmer board" that came from konica (15AN52822F)
    The newer version? or Older Version...

    Tried to swap the cutting material, from new PLATE to my current, and it fits with some modification, but was getting odd cuts. Didn't have time to mess with it, went back to old one and just reset. Got to figure out where to get the right part.


    Even the SD-501 has the same PINNED version. I can pull mine in the AM. Show you the difference.....


    Doubt they would even have and OLD part version anymore, have a feeling new trimmer is next...
    i have a parts SD506 in my storage, may go take a look. Maybe get lucky, doubt it.


    Capture.JPG


    thanks,

  4. #4
    Field Supervisor 500+ Posts
    SD-506


    Join Date
    Dec 2008
    Location
    Baltimore, Maryland
    Posts
    718
    Rep Power
    29

    Re: SD-506

    just took a look further... looks like the right part is A0H2B62201

    Only look at destination variations...

    what is the difference between A0H2WY2 and A0H2WY1?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here