Results 1 to 8 of 8
  1. #1
    Technician
    Join Date
    Mar 2016
    Location
    Valdosta, GA
    Posts
    24
    Rep Power
    8

    Bizbub C364e control panel

    Where would be a good place to purchase a control panel from?

    Let me say to start off I'm not a trained tech, but work with copiers buy way of my job. I tested copiers and repair them when they come off lease. So I have a understanding of the way cables are run and most service modes, but lack the knowledge to call parts by proper name.

    We have a control panel that you have to roll the start button on to get it to copy. Took screen apart and found the board the switch for start is on has a crack in it. Looks like some one leaned on it too much. Is it possible to just replace that board, or do I need to replace the whole control panel.

    I have no access to technical manuals due to we are just suppose to figure it out, or do the best we can, then they market it for what it can do. I like to have it fully working when it leaves me, so it's not so bad on the next guy.

    I have seen some screens on eBay for $300.00 and up.

  2. #2
    Master Of The Obvious 10,000+ Posts
    Bizbub C364e control panel

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    17,531
    Rep Power
    295

    Re: Bizbub C364e control panel

    We should start out by distinguishing between the screen and an operation panel. You need an operation panel. The screen will not include the PWB with the print button. And you'll need to update the firmware before changing the panel, then again after changing the panel. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Service Manager 1,000+ Posts
    Bizbub C364e control panel


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    1,800
    Rep Power
    57

    Re: Bizbub C364e control panel

    I should have a complete control panel if you still need it. PM me.

  4. #4
    Technician
    Join Date
    Mar 2016
    Location
    Valdosta, GA
    Posts
    24
    Rep Power
    8

    Re: Bizbub C364e control panel

    Quote Originally Posted by blackcat4866 View Post
    We should start out by distinguishing between the screen and an operation panel. You need an operation panel. The screen will not include the PWB with the print button. And you'll need to update the firmware before changing the panel, then again after changing the panel. =^..^=

    Operation panel, yes thanks. I really are looking to just replace the board that has the start button on it, due to i don't have access to firmware (I have never tried to load firmware on a KMN) I will check to see if someone has the correct firmware and instructions how this should be done properly.

    Thank you for taking the time to answer me.

    ~~Venluckey

  5. #5
    Master Of The Obvious 10,000+ Posts
    Bizbub C364e control panel

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    17,531
    Rep Power
    295

    Re: Bizbub C364e control panel

    If you change just the board it will still need firmware. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Senior Tech 100+ Posts
    Join Date
    May 2016
    Posts
    195
    Rep Power
    9

    Re: Bizbub C364e control panel

    Quote Originally Posted by blackcat4866 View Post
    If you change just the board it will still need firmware. =^..^=
    He needs only a little board with few microswitches (Start, stop reset, copy, scan, numeric)
    For that there's no need for FW update.

    A161P01800 Control PWB assembly

    It's not in parts manual, cost around 70$/,
    For non e version is different.

  7. #7
    Field Supervisor 500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    870
    Rep Power
    44

    Re: Bizbub C364e control panel

    Quote Originally Posted by REGSIS View Post
    He needs only a little board with few microswitches (Start, stop reset, copy, scan, numeric)
    For that there's no need for FW update.

    A161P01800 Control PWB assembly

    It's not in parts manual, cost around 70$/€,
    For non e version is different.

    Yes indeed, but in fact it is in parts manual, Page-4 Key-39.
    I have had success in the past by just changing micro switches, costs zero

    BTW here Control PWB assembly costs about 110$/€ without VAT, can we use your prices... lol
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

  8. #8
    Senior Tech 100+ Posts
    Join Date
    May 2016
    Posts
    195
    Rep Power
    9

    Re: Bizbub C364e control panel

    Quote Originally Posted by tsbservice View Post
    Yes indeed, but in fact it is in parts manual, Page-4 Key-39.
    I have had success in the past by just changing micro switches, costs zero

    BTW here Control PWB assembly costs about 110$/ without VAT, can we use your prices... lol
    On Infohub there's only one version of Parts manual, and on Page 4 there's only 37 keys.
    But nevermind.

    I'm a KM dealer and ordered one from KM 2 years ago.
    Price was 72 (minus dealer's dicount) +VAT. Should be the same everywhere in Europe.
    72 +VAT is price when I sell it to customer.

    It's a Hytec board, maybe can be ordered directly from them.
    Hytec Circuit Board, Print Controller, Stapler, Power Supply, Fuser Repair Catalog

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here