Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Mar 2010
    Location
    Lancaster Ohio
    Posts
    210
    Rep Power
    22

    Konica 458 533 finisher Staple alignment issue

    Konica 458 with a 533 finisher. If I make 4 copies to be stapled the second and third copy do not quite get pulled in enough and sometimes miss the staple. The second and third copy will usually stick out a quarter of an inch further than the first and fourth. Could this be the belts and if so how hard is it to replace them. I know on some finishers it's a long job.i cleaned the exit tires with rubber rejuvinator, no difference. Can it be something other than belts. Thanks

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Mar 2013
    Location
    Meridian, MS
    Posts
    789
    Rep Power
    25

    Re: Konica 458 533 finisher Staple alignment issue

    Quote Originally Posted by DOE View Post
    Konica 458 with a 533 finisher. If I make 4 copies to be stapled the second and third copy do not quite get pulled in enough and sometimes miss the staple. The second and third copy will usually stick out a quarter of an inch further than the first and fourth. Could this be the belts and if so how hard is it to replace them. I know on some finishers it's a long job.i cleaned the exit tires with rubber rejuvinator, no difference. Can it be something other than belts. Thanks
    Does the paper come out curled or cupped??? If so, then paper has moisture in it!!! I had this happen...tried different, better, dry paper stock which layed & stacked flat & stapled just fine. Konica 458 533 finisher Staple alignment issueKonica 458 533 finisher Staple alignment issue

    Sent from my SM-N950U1 using Tapatalk
    REACH FOR THE STARS!!!
    Konica Minolta Planetariums!
    https://www.konicaminolta.com/planet...gma/index.html

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Mar 2010
    Location
    Lancaster Ohio
    Posts
    210
    Rep Power
    22

    Re: Konica 458 533 finisher Staple alignment issue

    Quote Originally Posted by qbert69 View Post
    Does the paper come out curled or cupped??? If so, then paper has moisture in it!!! I had this happen...tried different, better, dry paper stock which layed & stacked flat & stapled just fine. Konica 458 533 finisher Staple alignment issueKonica 458 533 finisher Staple alignment issue

    Sent from my SM-N950U1 using Tapatalk
    Going to try this but paper comes out flat no curl.

  4. #4
    Field Supervisor 500+ Posts
    Konica 458 533 finisher Staple alignment issue

    guitar9199's Avatar
    Join Date
    Sep 2016
    Location
    Eveleth, MN
    Posts
    948
    Rep Power
    26

    Re: Konica 458 533 finisher Staple alignment issue

    Sometimes simply cleaning the reverse rollers and belts just isn't enough, and they're going to need replacement.

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Mar 2010
    Location
    Lancaster Ohio
    Posts
    210
    Rep Power
    22

    Re: Konica 458 533 finisher Staple alignment issue

    Quote Originally Posted by guitar9199 View Post
    Sometimes simply cleaning the reverse rollers and belts just isn't enough, and they're going to need replacement.
    Have you ever replaced belts on that finisher. I know some of them are Not to easy to replace on certain finishers

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here