C250i going offline and noisy

[occus]

Now i have the same problem on a +250i.
Customer cannot print when the machine goes offline, to bring it back online, they cycle the power OFF/ON to the copier.

Like on the first days of the e series, i have deaktivated the deep standby
1. CE Mode> Sleep on / off: permit.
2. Administrator> Power> Pause mode: no.

...the label energy star says hello and the fuser earlyer goodby... nothing new from KM.
I don't understand why this is not fixed in the newer generations.

[Toxic]

I have some note for settings on C224e with same problem years ago.
Maybe you could try on 250i

System 1 -> Sleep ON/OFF Choice Setting

Permit

Admin mode

Sleep Mode Settings	Off
Power Save Settings	Low Power
Power Key Setting	Sub Power Off
Enter Power Save Mode	Normal

[Bix]

Hi, the only solution for me was to disable all the options in "Weekly timer". I think the bug is in there.


For several days the C250i seems to go without problems

[occus]

Hi, the only solution for me was to disable all the options in "Weekly timer". I think the bug is in there.


For several days the C250i seems to go without problems

Not in my case... i deactivate this function on all devices in initial setup.

[Bix]

Not in my case... i deactivate this function on all devices in initial setup.

On which firmware version?

edit -
I currently use 45. Disconnect the plug and the ethernet completely. Turn ON the MFP and then plug in the network cable.
Another thing that I have disabled is the IP Filtering which by default is ON.

[occus]

Firmware 45.

At the moment the problem is solved with disabled Sleep function. I have to wait now to see what happens.
But thank you for your advice.

[Bix]

There appears to be a new firmware: G00-73


However, in the logs I don't see the resolution of this strange problem mentioned

[srvctec]

There appears to be a new firmware: G00-73


However, in the logs I don't see the resolution of this strange problem mentioned

Just checked and not available here in the US yet.

[occus]

Same Problem with the Firmware G00-73, sometime it goes not down and comes not up. There is no fix for the standby problem.
Energystar byebye with the deactivated settings.

And now i have to visit a noisi 250i...

[bugzy]

Replace the storage board, I have done this on 2 machines and it has worked