Hi, the printer works perfectly. It's like the network card stops working.
The only anomaly is that in the different reboots, only once did it stop loading.
Hi, the printer works perfectly. It's like the network card stops working.
The only anomaly is that in the different reboots, only once did it stop loading.
I can't understand the "Enable energy saving: low energy or paused" option.
Which is the best according to you?
Bix, try to use these settings:
1. [Power Save Settings] - [Sleep]
2. [Power Consumption in Sleep Mode] - [Disabled]
3. [Enter Power Save Mode] - [Normal]
4. [Power Key Setting] - [Power Save]
Personlly I think that [Power Consumption in Sleep Mode] - [Disabled] may be the key as this basically is described as
"Select this option when a smooth network communication is not established while [High] or [Enabled] is enabled(High is default)."
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
I have to agree on this part. That's part of our normal setup procedure now as I discovered on a 4e machine a few years ago, having that setting set to anything other than disabled, caused the machine to not wake up in the morning when the business opened and sent print jobs to the machine. That's the only setting I changed and they've not once had the issue again, hence our now setting all machines this way.
Started in the copier service business in the fall of 1988 and worked at the same company for 33.5 years, becoming the senior tech in 2004 but left to pursue another career on 4/29/22.
I made a complete all clear data.
Now I have switched to [Power Consumption in Sleep Mode] from Activated to Disabled
Thank you guys,
I will update you if there are complications.
Last edited by Bix; 11-28-2019 at 03:54 PM.
Unfortunately, after several days, even today c250i offline! Even with the suggested energy saving settings and after clearing all.
Turned off and on again, it started working again.
the G00-75 has come out, no timeout information or energy saving problems in the logs. But something has changed in the CPU.
Bookmarks