Thanks: 
Likes: 
Dislikes: nope as you wish
nope as you wish
So the only option is to call KM.Originally Posted by lucycopy
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
and if I wanted to completely remove the CE password?
stop 0 clear CE password set to off
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
How about entering CE mode from the trouble reset screen you dont need to enter the password then enter enhanced security by pressing stop 0 C then turn off CE authentication.
Try this method be interested to see if it will work.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
As far as I remember machine will be asking forr CE password, but I may be wrong.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
i can confirm if CE password is enabled entering via trouble reset will still request password.
it would be security flaw if it did
if you can contact KM to reset password you will need to do following
At CE password screen press stop then clear
this will give you a token code to supply
Last edited by rrrohan; 09-17-2019 at 05:37 AM.
Yes but the poster can now use the default 9272 password not the one he doesnt know.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Yeah but then you have to do run-up procedure again.
Resetting code with help from KM is much easier imo
Interesting thread. Thanks for posting it.
I am considering selling one of these to a long time customer. From what I gather it sounds like a fairly good machine.
He will need to be able to run the 12X18" paper, so I may have to look at the BHC308.
But I am interested in what techs that work on this model have to say. Any re-occurring problems? Or quirks?
I am an indy and will find the service manuals before I get the machine.
Is this CE authentication turned on at the factory? I have worked the BHC line for a number of years and would like
to stay with this brand.
Thanks
DR
Reply With Quote
Bookmarks