Thanks: 0
Likes: 0
Dislikes: 0
Hi
I need to replace part #A03X656203(item No 24 in P 42,PDF page 94) in PF707. My problem is I am unable to locate the part # of the bottom part which holds the knob tight in place .
I haven't opened this section and I was hoping to have all the parts with me before i start.
Thanks in advance
a machine is only as good as your tech : source:screwtape ; the scary one
It's threaded into the side frame #33. I've seen the threads into that frame strip out.
It's a simple task to drill and re-tap the frame a few millimeters over and screw the thumbscrew into the new threaded hole. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
thanks blackcat
a machine is only as good as your tech : source:screwtape ; the scary one
Reply With Quote
Bookmarks