Originally Posted by
Bix
Hi, the Ubuntu driver may not be updated to the function of the machine.
Currently I don't know your firmware but if you have the latest firmware, the version should be 4.2
So what I suggest you is to set up a previous printer version. Access the Service Mode and in the Dipswitch section change the 25.
You can change the hexadecimal values:
HEX B0 -> 4.2 does not work? Go to the previous one:
HEX A0 -> 4.1 does not work? Go to the previous one:
HEX 90 -> 4.0
etc.
I advise you to make this attempt.
Bookmarks