Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Junior Member
    Join Date
    Sep 2019
    Location
    LA
    Posts
    4
    Rep Power
    0

    Bizhub C452 Outfeed Paper Jam

    I've got a Bizhub C452 that consistently jams at the same output point. I've attached a picture of where the paper gets stuck every time. When copying a single page just one paper gets stuck at that location, if attempting a feed test from the service menu then it'll jam up multiple pages, One right at the rollers, one at the fuser and one from the tray coming up so seems to just be backing up from getting stuck at this point. As seen in the pictures the unit was dusty, I cleaned up the area and wiped down the rollers to see if that helped but same issue. Looking for some further assistance diagnosing what I can do to fix the jam.

    IMG_8383.jpg

  2. #2
    Service Manager 1,000+ Posts
    Bizhub C452 Outfeed Paper Jam

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,261
    Rep Power
    48

    Re: Bizhub C452 Outfeed Paper Jam

    remove the bridge unit. will it jam if no finisher attached?

  3. #3
    Service Manager 5,000+ Posts
    Bizhub C452 Outfeed Paper Jam

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    5,384
    Rep Power
    96

    Re: Bizhub C452 Outfeed Paper Jam

    Quote Originally Posted by Synthohol View Post
    remove the bridge unit. will it jam if no finisher attached?

    +1

    is it kicking any error/jam codes?



  4. #4
    Junior Member
    Join Date
    Sep 2019
    Location
    LA
    Posts
    4
    Rep Power
    0

    Re: Bizhub C452 Outfeed Paper Jam

    Quote Originally Posted by Synthohol View Post
    remove the bridge unit. will it jam if no finisher attached?
    With the finisher disconnected / removed from the unit it'll still jam in the same position. I'll check about the bridge unit

  5. #5
    Field Supervisor 500+ Posts
    Join Date
    Oct 2011
    Location
    Sydney
    Posts
    601
    Rep Power
    29

    Re: Bizhub C452 Outfeed Paper Jam

    Check the last sensor the paper passed and +1 for what jam code, basic information.

  6. #6
    Service Manager 1,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    1,094
    Rep Power
    54

    Re: Bizhub C452 Outfeed Paper Jam

    I have seen this once on bizhub C360 when one of FS connectors wasn't plugged into machine. Always jammed at same location. Check your finisher connectors and inspect them for bend pins.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

  7. #7
    Junior Member
    Join Date
    Sep 2019
    Location
    LA
    Posts
    4
    Rep Power
    0

    Re: Bizhub C452 Outfeed Paper Jam

    Quote Originally Posted by tsbservice View Post
    I have seen this once on bizhub C360 when one of FS connectors wasn't plugged into machine. Always jammed at same location. Check your finisher connectors and inspect them for bend pins.
    There is just one connector from the finisher to the main unit, none of the pins seem to be damaged or bent.

    The error code is 72-16 with jam locations 13 and 31 Screen Shot 2019-09-30 at 11.35.58 AM.jpg

  8. #8
    Field Supervisor 500+ Posts
    Bizhub C452 Outfeed Paper Jam


    Join Date
    Oct 2010
    Posts
    698
    Rep Power
    32

    Re: Bizhub C452 Outfeed Paper Jam

    Quote Originally Posted by C47Sys View Post
    With the finisher disconnected / removed from the unit it'll still jam in the same position. I'll check about the bridge unit
    Curious if you removed the bridge unit or not. It will jam with the bridge unit and the finisher disconnected.

  9. #9
    Junior Member
    Join Date
    Sep 2019
    Location
    LA
    Posts
    4
    Rep Power
    0

    Re: Bizhub C452 Outfeed Paper Jam

    Quote Originally Posted by darry1322 View Post
    Curious if you removed the bridge unit or not. It will jam with the bridge unit and the finisher disconnected.
    Problem solved I went to remove the bridge unit and did actually find a loose connector and now there is no longer a jam

  10. #10
    Field Supervisor 500+ Posts
    Bizhub C452 Outfeed Paper Jam


    Join Date
    Oct 2010
    Posts
    698
    Rep Power
    32

    Re: Bizhub C452 Outfeed Paper Jam

    Quote Originally Posted by C47Sys View Post
    Problem solved I went to remove the bridge unit and did actually find a loose connector and now there is no longer a jam

    Congrats.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here