Have a bizhub c224e where I get light streaks through color copies only they are about an eighth of an inch wide and run from lead to Trail Edge. 4 consumable Life the developer units for all the color are on 45% and for the drum units the magenta and yellow are at 69% and the black and cyan are at zero. The Imaging transfer belt unit is at 0% but the transfer roller unit is at 95%. Do you think the color units even though only at 45% need a good developer change. Black copies are perfect no streaks. Also seems like streaks only run through the lighter colors and where the colors are dark you don't see it has much. Also don't seem to get streaks to red on the copies
Bookmarks